Overview
MP-301E diaphragm vacuum pump is a laboratory vacuum equipment produced by GREATWALL. The pump and the gas contact parts are made of PTFE material, which has excellent chemical corrosion resistance. It can replace the traditional circulating water or rotary vane vacuum pump. It has the characteristics of small size, light weight, easy movement, no consumption of water resources, environmental protection and cleanliness.
Features
1. The contact parts with the gas are made of TFE PTFE material, which has strong chemical corrosion resistance.
2. It can replace circulating water vacuum pumps and rotary vane vacuum pumps.
3. Small size, light weight, easy to move, save space.
4. Does not consume water resources, is environmentally friendly and clean.
5. The valve plate is made of imported materials.
6. Easy maintenance and repair.
7. After 1500 hours of fatigue test, it can work permanently and stably.
8. The pump body temperature is low.
9. New structural design, Vacuum Level and pumping rate significantly improved.
Principle
The product is a diaphragm vacuum pump, which drives the eccentric wheel through the motor to drive the diaphragm to reciprocate and change the volume of the pump chamber, so as to realize the suction and discharge of gas and form a vacuum.
Applications
Laboratory, scientific research, chemical industry, medicine, environmental protection
Steps
1. Place the equipment on a stable and well-ventilated workbench.
2. Connect the power supply (220V/50Hz).
3. Connect the device that needs to be vacuumed to the air inlet of the pump through a suitable pipeline (diameter φ 7mm).
4. Turn on the power switch and start the vacuum pump.
5. After use, turn off the power switch and disconnect the power supply.
6. Disconnect from the pumped container.
Notice
• Power supply voltage meets equipment requirements (220V/50Hz).
• Please check whether the pipeline connection is firm and sealing before use.
• Do not use in environments with flammable, explosive or corrosive gases exceeding the standard.
• The pump body is working at a low temperature, but it is still necessary to pay attention to ventilating heat dissipation.
• Regular maintenance and maintenance to maintain optimum performance.
• Handle with care when moving or handling.
Do not disassemble or modify the equipment without authorization.
