Overview
UVC LED Probe is a digital Probe developed by LINSHANG Technology for UVC LED Illuminant, which is one of the 9 Probes of LS125 ultraviolet radiation luminometer. The Probe Response wavelength is 200nm-400nm, which is suitable for intensity and energy detection of high-power LED sterilization lamps from 220nm-320nm.
Features
1. UVC LED Illuminant Special UV Intensity Detector.
2. Large range measurement, Power MAX Maximum can be measured to 200,000 μW/cm ².
3. The instrument can measure energy value and Power value simultaneously.
4. With rich statistical functions, Power real-time value, MAX Maximum, MIN Minimum, average value, measurement time, energy value is displayed at the same time.
5. Can switch 3 kinds of Measurement units, namely μW/cm ², mW/cm ², W/m ², data conversion between different units without manual calculation.
Principle
As one of the digital Probes of the LS125 multi-Probe ultraviolet radiation luminometer, the Probe adopts a plug-in design. The instrument intelligently determines the model of the Probe. According to its specific Light spectrum Response range (200nm-400nm), the Probe detects the UVC LED Illuminant in the corresponding band (220nm-320nm), converts the optical signal into an electrical signal, and processes it by the host and displays the Power and Energy values.
Applications
220nm-320Nm LED Illuminant Strength and Energy Testing
Steps
Plug the UVC LED Probe into the LS125 host.
2. The host will automatically recognize the Probe model.
3. Align the Probe metering hole with the UVC LED Illuminant to be tested.
4. Read or record real-time Power values, statistical values and energy values on the host.
5. Measurement units can be switched as needed (μW/cm ², mW/cm ², W/m ²).
Notice
• This Probe is designed for UVC LED Illuminant, with a Light spectrum Response range of 200nm-400nm, suitable for LED germicidal lamp testing from 220nm to 320nm.
• Measurement accuracy of +/- 10%.
Note the matching of Probe's Light spectrum Response Range to the applied light source wavelength.
• The diameter of the test hole is 10mm.
• Sensor size is φ 46 * 16.5mm.
