Overview
UVB Probe is a professional digital Probe of LINSHANG brand LS125 UV intensity detector, dedicated to detecting UVB Illuminant. Its Light spectrum Response range is 280nm-320nm, suitable for UVB Illuminant measurement at specific wavelengths such as 297nm, 308nm, 313nm. The Probe can be used in UV health lamps, medical physiotherapy lamps, plant growth lamps, fluorescent lamps, aging experiments and other fields.
Features
Suitable for UVB Illuminant measurement at 297nm, 308nm, 313nm and other wavelengths.
2. The instrument can measure energy value and Power value simultaneously.
3. With rich statistical functions, Power real-time value, MAX Maximum, MIN Minimum, average value, measurement time, energy value is displayed at the same time.
4. Can switch 3 kinds of Measurement units, namely μW/cm2, mW/cm2, W/m2, data conversion between different units without manual calculation.
Principle
As one of the digital Probes of the LS125 multi-Probe ultraviolet radiation luminometer, the Probe adopts a plug-in design. The instrument intelligently recognizes the Probe model and makes measurements according to the Light spectrum Response range of the Probe. The Probe receives UVB ultraviolet rays of a specific wavelength (280nm-315nm) through its Sensor and converts them into electrical signals, which are processed by the host and display Power and Energy values.
Applications
UV health lamp, medical physiotherapy lamp, plant growth lamp, fluorescent lamp, aging experiment
Steps
Plug the UVB Probe into the LS125 host.
2. The host will automatically recognize the Probe model.
3. Aim the Probe's light hole at the UVB Illuminant to be tested.
4. Read the real-time Power value, energy value and related statistics displayed on the host screen.
5. Measurement units can be switched as needed (μW/cm2, mW/cm2, W/m2).
Notice
• Probe Light spectrum Response range is 280nm-315nm, make sure to use UVB Illuminant measurement in this range.
• For measurement, align the Probe hole (diameter 10mm) with the Illuminant.
Measurement accuracy is +/- 10%.
• This Probe is a supporting component of the LS125 UV intensity detector and needs to be used with the host.
