Overview
The UVA-X1 Probe is one of the dedicated Probes for the LS125 UV luminometer, with a Light spectrum Response range of 260nm-400nm and calibrated to 365nm Illuminant. The Probe is designed for aging tests or UV intensity and energy detection in sunlight, and is suitable for simulating sunlight exposure conditions in natural climates.
Features
1. Suitable for aging tests or UV intensity and energy detection in sunlight.
2. The instrument can measure energy value and Power value simultaneously.
3. With rich statistical functions, Power real-time value, MAX Maximum, MIN Minimum, average value, measurement time, energy value is displayed at the same time.
4. 3 Measurement units can be switched, namely μW/cm2 (default), mW/cm2, W/m2, data conversion between different units without manual calculation.
Principle
As the digital Probe of the LS125 multi-Probe ultraviolet radiation luminometer, the UVA-X1 Probe adopts a plug-in design. The host can intelligently identify the inserted Probe model and make measurements according to the Light spectrum Response range of the Probe. The Probe detects ultraviolet radiation in the 260nm-400nm band through its Sensor and transmits the signal to the host for processing and display.
Applications
Ultraviolet aging box, intensity and energy test of ultraviolet rays of light in the sun
Steps
Plug the UVA-X1 Probe into the LS125 host.
2. The host will automatically recognize the Probe model.
3. Aim the Probe at the Illuminant to be measured.
4. Read the Power real-time value, MAX Maximum, MIN Minimum, Average value, measurement duration and energy value displayed on the host screen.
5. Measurement units of μW/cm2, mW/cm2 or W/m2 can be switched as required.
Notice
• Probe Light spectrum Response range is 260nm-400nm, calibrated to 365nm Illuminant, please make sure to use within the applicable range.
• Measurement accuracy is +/- 10%, please pay attention to the error range when using.
• Do not use Probes with Illuminants beyond their Power Measurement range (0 to 200,000 μW/cm2).
• Protect Probe test holes and Sensors to avoid physical damage.
• This Probe is dedicated to the LS125 host and needs to be used with a compatible host.
