Overview
DHJF-8020 Thermostatic Stirring Reaction Bath is a laboratory equipment produced by GREATWALL. It is mainly used to replace dry ice and liquid nitrogen for low temperature reaction. It can accurately chill down and heat control reaction vessels such as flasks, beakers and testtubes. The equipment is suitable for scenes such as scientific research institutes, university laboratories and enterprise laboratories.
Features
1. The temperature control adopts PID mode, and the temperature control accuracy is high.
2. Temperature setting and display using digital mode, easy to operate, easy to monitor.
3. Fully enclosed Magnetic Stirrer, smooth operation and long service life.
4. It can be equipped with two-stage stirring to ensure uniform temperature of the sample in the user's reaction vessel.
5. The diameter of the groove cover can be adjusted to effectively reduce the loss of refrigerant during operation.
6. Equipped with external fixture holder, easy to install Burette, external Sensor, etc.
7. Using brand Compressor, reliable operation and high efficiency.
8. There is a liquid discharge port under the tank, which is convenient for changing the bath liquid in the tank.
Principle
Precise adjustment of the bath temperature in the Tank is achieved through the built-in Compressor refrigeration system and electric heating system combined with PID intelligent temperature control. The fully enclosed Magnetic Stirrer drives the swirl/spin of the stirrer in the tank for uniform bath temperature and ensures consistent material temperature in the user's reaction vessel with a two-stage stirring option. Adjustable tank cover and drain port design for easy operation and maintenance.
Applications
Research institutes, university laboratories, enterprise laboratories
Standards
The information does not mention
Steps
The information does not provide specific operation steps, please refer to the product manual.
Notice
• Equipment Permissible Ambient Temperature is 5~ 25 ℃.
• Power supply voltage requirement is 220-240V~, 50Hz.
• Please confirm that the equipment is placed firmly before use.
• Please use the liquid port under the tank when changing the bath liquid.
• Please pay attention to the adjustment of the diameter of the groove cover during operation to reduce the loss of refrigerant.
• When installing external components (e.g. Burette, Sensor), please use the configured mounting frame.
