Overview
SB25-12DTS is a dual-frequency Ultrasonic Cleaner of JINGQI brand. The device has an inner slot size of 500 * 300 * 150mm and a capacity of 22.5L. It has two types of ultrasonic Frequency conversion of 25KHz and 45KHz, and is equipped with heating function.
Features
1. With 25KHz and 45KHz Frequency, you can choose to convert according to the cleaning needs.
2. Adopt single-chip microcomputer software control, and the working parameters are equipped with power-off memory function.
3. The LCD screen can be set and countdown to display the ultrasonic cleaning time of 1-99 minutes.
4. Real-time display of the actual temperature in the cleaning tank, with a temperature setting range from room temperature to 80 ° C.
5. The instrument shell, inner groove and lower cover are made of stainless steel, which is sturdy and durable.
6. Equipped with a special stainless steel net basket and a sound-lowering cover, it is convenient to operate and reduce noise.
7. Equipment is equipped with drainage function.
Principle
The Ultrasonic Cleaner generates a high-frequency electrical signal through an ultrasonic generator, which drives the transducer to convert the electrical energy into mechanical vibration, generating a large number of tiny bubbles (cavitation effect) in the cleaning liquid. These bubbles rupture rapidly under the action of pressure, generating an Impact force, thereby disbonding the stains attached to the surface of the object to achieve the purpose of efficient cleaning. The equipment can choose a Frequency of 25KHz or 45KHz to adapt to the needs of different cleaning objects, and at the same time, it is supplemented with a heating function to improve the cleaning effect.
Applications
Laboratory ware cleaning, electronic components cleaning, precision parts cleaning, jewelry cleaning, Optical inspection lens cleaning, medical apparatus pretreatment, Hardware tool cleaning
Standards
The data did not mention specific compliance criteria.
Steps
1. Add an appropriate amount of cleaning liquid to the cleaning tank.
2. Put the items to be cleaned into a special stainless steel mesh basket, and then immerse them in the cleaning solution.
3. Cover the bass cover.
4. Turn on the power and select the desired Ultrasonic Frequency (25KHz or 45KHz) through the control panel.
5. Set the required cleaning temperature (room temperature -80 ° C) and cleaning time (1-99 minutes).
6. Start the device, start cleaning, and the LCD screen will display a countdown and real-time temperature.
7. After cleaning is completed, the equipment automatically stops and the items are taken out.
8. After use, the waste liquid can be discharged through the drain.
Notice
• Do not activate the ultrasonic and heating functions without the cleaning liquid in the tank.
• The amount of cleaning fluid added should ensure that it can submerge the items to be cleaned, but should not exceed Maximum capacity.
When setting the temperature, do not exceed the upper limit of 80 ° C.
• When cleaning corrosive or flammable items, choose the appropriate cleaning solution and pay attention to safety.
Equipment housing is made of stainless steel, but sharp objects should still be avoided.
• When not in use for a long time, empty the tank and keep drying.
• Before performing maintenance, be sure to disconnect the power supply of the equipment.
