Overview
SB-4200DTS is a dual-frequency Ultrasonic Cleaner produced by JINGQI brand. The device has an inner slot size of 300 * 240 * 200mm and a capacity of 14.4L. It has two ultrasonic Frequencies of 25KHz and 45KHz to choose from, and is equipped with heating function. The temperature setting range is from room temperature to 80 ° C.
Features
1. With 25KHz and 45KHz Frequency selectable conversion.
2. The total Working time setting range is 1-600 minutes, and it has a Working time countdown LCD display.
3. Equipped with a special stainless steel net basket and a lower cover.
4. The inner and outer shells and the sound-lowering cover of the instrument are made of stainless steel.
5. The actual temperature in the cleaning tank can be displayed in real time, and the temperature setting range is from room temperature to 80 ° C.
6. The operating program of the instrument adopts single-chip microcomputer software, with power-off memory function for working parameters.
7. Equipped with drainage function.
Principle
The Ultrasonic Cleaner is controlled by a single-chip microcomputer software to generate a high-frequency electrical signal to drive the transducer, which converts the electrical energy into mechanical vibration, thereby generating an ultrasonic cavitation effect in the cleaning liquid. Impact of cavitation bubbles on the surface of the workpiece to break, achieving the purpose of cleaning. The equipment provides 25KHz and 45KHz Frequency to adapt to different cleaning needs, and can assist the cleaning process through heating function.
Applications
Laboratories, Electronics manufacturing, Jewellery, Optical inspection lenses, medical apparatus, Hardware parts, Auto parts, Watch repair
Standards
The data did not mention specific compliance criteria.
Steps
1. Select the appropriate Ultrasonic Frequency (25KHz or 45KHz) according to the cleaning items.
2. Add an appropriate amount of cleaning liquid to the cleaning tank.
3. Put the items to be cleaned into a special stainless steel mesh basket and then place them in the tank.
4. Cover the bass cover.
5. Set the required cleaning temperature (room temperature -80 ° C) and cleaning time (1-600 minutes) through the control panel.
6. Start the device, the device will start heating (if set) and perform ultrasonic cleaning, and the LCD screen will display a countdown and real-time temperature.
7. After cleaning, take out the items and use the drainage function to empty the cleaning liquid if necessary.
Notice
Do not activate the ultrasonic and heating functions without cleaning fluid.
* Please cover the muffler cover when operating to reduce noise and prevent liquid from splashing.
Do not exceed the upper limit of 80 ° C when setting the temperature.
After the cleaning is completed, please remove the cleaning items in time and empty or replace the cleaning liquid.
* Please use the special stainless steel net basket provided with the equipment.
* The device has a power-off memory function. Please pay attention to check the working parameters after re-powering.
When maintaining and cleaning, please disconnect the power supply.
