Overview
SB-5200DTS is a dual-frequency Ultrasonic Cleaner of JINGQI brand. The inner slot size of this product is 300 * 240 * 200mm, the capacity is 10L, and it has two types of ultrasonic Frequency conversion of 25KHz and 45KHz, and is equipped with heating function. The temperature setting range is from room temperature to 80 ° C.
Features
1. With 25KHz and 45KHz Frequency selectable conversion.
2. Working time setting range is 1-600 minutes, support countdown display.
3. Using LCD screen, ultrasonic cleaning time can be set and displayed.
4. Equipped with a special stainless steel net basket and a flat cover.
5. The instrument's inner and outer casing and sound-lowering cover are made of good stainless steel.
6. Real-time display of the actual temperature in the cleaning tank.
7. The operating program of the instrument adopts the microcontroller software.
8. With power-off memory function for working parameters.
9. Equipped with drainage function.
Principle
The Ultrasonic Cleaner converts electrical energy into high-frequency mechanical vibration (ultrasonic) through a transducer, generating tens of thousands of tiny bubbles (cavitation effect) in the cleaning liquid. These bubbles close quickly under the action of pressure, generating a strong Impact force, which acts on the surface of the object to be cleaned, thereby disbonding and dispersing the dirt to achieve the purpose of efficient cleaning. Frequency of 25KHz or 45KHz can be selected to adapt to different cleaning needs, and the cleaning process can be assisted by heating function.
Applications
Laboratories, Electronics manufacturing, Jewellery, Optical inspection lenses, medical apparatus, Hardware parts, Auto parts, Watch repair
Steps
1. Add an appropriate amount of cleaning liquid to the cleaning tank.
2. Put the items to be cleaned into a special stainless steel mesh basket and immerse them in the cleaning solution.
3. Cover the bass cover.
4. Select the desired Ultrasound Frequency (25KHz or 45KHz) through the control panel.
5. Set the required cleaning temperature (room temperature to 80 ° C).
6. Set the total cleaning Working time (1-600 minutes).
7. Start the device, start the cleaning process, and the LCD screen will display a countdown.
8. After cleaning is completed, remove the items and use the drainage function to empty the cleaning liquid if necessary.
Notice
• Do not activate the ultrasonic and heating functions without cleaning fluid.
The cleaning fluid level should be at least below the transducer, but should not exceed 3/4 of the height of the inner tank.
• Please select the appropriate cleaning fluid, Frequency and Temperature according to the material of the cleaning item and the type of dirt.
• Please cover the muffler cover when operating to reduce noise.
Equipment should be placed in a smooth, well-ventilated environment.
Before cleaning and maintenance, be sure to disconnect the power supply of the equipment.
• Do not use corrosive or flammable liquids as cleaning fluids.
• The device has a power-off memory function. Please pay attention to check the parameter settings after re-powering.
