Overview
The SB-3200DTS Dual Frequency Ultrasonic Cleaner is a device produced by JINGQI with an inner slot size of 300 * 155 * 150mm and a capacity of 4L or 6L. The device has two ultrasonic Frequencies of 25KHz and 45KHz to choose from, and has an integrated heating function. The temperature setting range is from room temperature to 80 ° C.
Features
1. With 25KHz and 45KHz Frequency, you can choose to convert according to the cleaning needs.
2. Using LCD screen, it can set the total Working time of 1-600 minutes, and has the function of Working time countdown display.
3. Real-time display of the actual temperature in the cleaning tank, with a temperature setting range from room temperature to 80 ° C.
4. The instrument uses a single-chip microcomputer software to control the operation program, and has a power-off memory function for working parameters.
5. Equipped with a special stainless steel net basket and a sound-lowering cover, the inner and outer shells of the instrument and the sound-lowering cover are made of good stainless steel.
6. Equipped with drainage function.
Principle
The Ultrasonic Cleaner uses a high-frequency electrical signal to drive the transducer, generating ultrasonic waves (Frequency of 25KHz or 45KHz) to propagate in the cleaning liquid. Ultrasonic waves produce a cavitation effect in the liquid, forming countless tiny bubbles and instantly bursting, generating a strong Impact force, thereby disbonding the dirt attached to the surface of the object to achieve the purpose of efficient cleaning. The equipment also has a heating function, which can enhance the cleaning effect by heating up.
Applications
Precision parts, laboratory utensils, jewelry, Optical inspection lenses, medical apparatus, electronic components
Standards
The information does not mention
Steps
1. Add an appropriate amount of cleaning liquid to the cleaning tank.
2. Put the items to be cleaned into a special stainless steel mesh basket, and then immerse them in the cleaning solution.
3. Select the Ultrasonic Frequency (25KHz or 45KHz) through the control panel as required.
4. Set the required cleaning temperature (room temperature to 80 ° C) and cleaning time (1-600 minutes).
5. Start the device, the ultrasonic cleaning and heating functions start to work, and the screen displays a countdown and real-time temperature.
6. After cleaning, take out the items, and if necessary, use the drainage function that comes with the device to empty the cleaning liquid.
Notice
• Do not start the ultrasonic and heating functions without the cleaning liquid in the tank.
• The cleaning liquid level should ensure that the items in the basket are submerged, but it should not be too full.
• When choosing a cleaning solution, consider its compatibility with the material of the cleaning item.
When setting the temperature, do not exceed the upper limit of 80 ° C.
• Clean the tank body in time after use and keep the equipment drying.
Before performing maintenance, ensure that the equipment is powered off.