Overview
SB-1000DT ultrasonic cleaner is an industrial grade cleaning equipment produced by JINGQI. The equipment adopts stainless steel shell and sound lowering cover, and is equipped with a special stainless steel net basket. It has digital display setting, temperature control, regular cleaning and drainage functions, and is suitable for a variety of Industrial cleaning scenarios.
Features
1. Digital display to set the ultrasonic cleaning time, Working time countdown display.
2. Equipped with a special stainless steel net basket and a flat cover.
3. The instrument's inner and outer casing and sound-lowering cover are made of good stainless steel.
4. Real-time display of the actual temperature in the cleaning tank, room temperature -80 ° C temperature setting range.
5. The operating program of the instrument adopts the software of the single-chip microcomputer, and the power-off memory function of the working parameters.
6.1-99 minutes Total Working time setting.
Principle
The ultrasonic cleaner uses high-frequency ultrasound (Frequency is 28KHz) to generate cavitation effect in the cleaning liquid, forming countless tiny bubbles and instantly bursting, generating impact force to disbonding stains attached to the surface of the object. At the same time, the equipment is equipped with a heating system, which can heat the cleaning liquid to a set temperature (room temperature to 80 ° C) to enhance the cleaning effect. The entire cleaning process is controlled by the microcontroller program to achieve accurate management of time and temperature.
Applications
Industrial Parts Cleaning, Laboratory Utensils Cleaning, Electronic Components Cleaning, Precision Instrument Cleaning, Hardware Tool Cleaning
Standards
The information does not mention
Steps
1. Inject the cleaning liquid into the cleaning tank to a suitable level.
2. Put the items to be cleaned into a special stainless steel mesh basket and place them in the tank.
3. Cover the bass cover.
4. Set the required cleaning temperature (room temperature to 80 ° C) and cleaning time (1-99 minutes) through the control panel.
5. Start the device, the ultrasonic cleaning and heating functions start to work, and the screen displays the countdown and real-time temperature.
6. After cleaning is completed, the equipment automatically stops, and the drain valve can be opened to discharge the cleaning liquid.
7. Remove the cleaned items.
Notice
• Do not activate the ultrasonic and heating functions without cleaning liquid.
The cleaning fluid level should meet the requirements to avoid being too high or too low.
• When placing items, ensure that they do not directly contact the ultrasonic vibrator at the bottom or side wall of the cleaning tank.
When setting the temperature, do not exceed the upper limit of 80 ° C.
• During the operation of the equipment, do not open the lower cover or put your hand into the cleaning liquid.
• Make sure the equipment has stopped working and chilled down before draining.
• Regularly clean and maintain equipment to maintain its performance.
