Overview
The SB25-12DT ultrasonic cleaner is a product under the JINGQI brand. It has a stainless steel shell and a sound-lowering cover, and is equipped with a special stainless steel mesh basket. The device has digital display settings and real-time display functions, which can precisely control the cleaning time and the temperature in the tank, and has a power-off memory function for working parameters.
Features
1. Digital display setting ultrasonic cleaning time, 1-99 minutes total Working time setting.
2. Working time countdown display.
3. Real-time display of the actual temperature in the cleaning tank.
4. Room temperature setting range of -80 ° C.
5. Power-off memory function for working parameters.
6. Equipped with a special stainless steel net basket and a sound-lowering cover.
7. The instrument's inner and outer casing and sound-lowering cover are made of good stainless steel.
8. The operating procedures of the instrument are based on microcontroller software.
Principle
The ultrasonic cleaner generates high-frequency electrical signals through an ultrasonic generator, which drives the transducer to convert electrical energy into mechanical vibration, generating a large number of tiny bubbles in the cleaning liquid. These bubbles expand rapidly and close violently under the action of sound pressure, generating a strong Impact force, which acts on the surface of the object to be cleaned, so as to achieve the purpose of disbonding dirt and cleaning the object. The cleaning process is combined with the heating function to improve the cleaning effect.
Applications
Laboratories, Electronics, Machinery, Medical, Jewelry, Optical inspection lenses, Auto parts, Hardware tools
Standards
The data did not mention specific compliance criteria.
Steps
1. Inject the cleaning liquid into the cleaning tank to the appropriate level.
2. Put the cleaned items into a special stainless steel mesh basket and then place them in the groove.
3. Set the required cleaning temperature (room temperature to 80 ° C) through the control panel.
4. Set the cleaning time (1-99 minutes) through the control panel.
5. Start the equipment, start ultrasonic cleaning, and observe the countdown display.
6. After cleaning, take out the net basket and items, or use the drainage function to empty the cleaning liquid.
Notice
• Do not activate the ultrasonic and heating functions without cleaning liquid.
The cleaning fluid level should meet the requirements to avoid being too high or too low.
• Please choose the appropriate cleaning agent and temperature according to the material of the cleaning items.
• Do not put your hands into the cleaning tank during operation.
Equipment should be placed in a smooth, well-ventilated environment.
• Please clean the equipment and drain the liquid immediately after use (if applicable).
• Before performing maintenance, make sure the equipment is powered off and chilled down.
