Overview
The SB-4200DT ultrasonic cleaner is a digital cleaning device produced by JINGQI. The device adopts a stainless steel shell and a sound-lowering cover, and is equipped with a special stainless steel net basket. It has functions such as temperature control, time setting and countdown display. It is suitable for cleaning a variety of items.
Features
1. Digital display to set the ultrasonic cleaning time, Working time countdown display.
2. Equipped with a special stainless steel net basket and a flat cover.
3. The instrument's inner and outer casing and sound-lowering cover are made of good stainless steel.
4. Real-time display of the actual temperature in the cleaning tank, with a temperature setting range from room temperature to 80 ° C.
5. Working parameters with power-off memory function.
6. Working time range is 1-99 minutes.
7. Equipped with drainage function.
Principle
The ultrasonic cleaner is controlled by a microcontroller program. Its core is to use an ultrasonic generator to generate high-frequency electrical signals, drive the transducer to convert electrical energy into mechanical vibration, and generate a large number of tiny bubbles (cavitation effect) in the cleaning liquid. The impact force generated by these bubbles when they burst is used to clean the surface of the object to achieve the purpose of efficient cleaning.
Applications
Laboratory ware cleaning, electronic parts cleaning, jewelry cleaning, Optical inspection lens cleaning, medical apparatus pretreatment, Hardware parts degreasing, precision mechanical parts cleaning
Standards
The data did not mention specific compliance criteria.
Steps
1. Add an appropriate amount of cleaning liquid to the cleaning tank.
2. Put the items to be cleaned into a special stainless steel mesh basket, and then immerse them in the cleaning solution.
3. Cover the bass cover.
4. Set the required cleaning temperature (room temperature to 80 ° C) and cleaning time (1-99 minutes) through the control panel.
5. Start the device, start cleaning, and the screen will display a countdown and real-time temperature.
6. After cleaning is completed, the equipment automatically stops and the items are taken out.
7. After use, the cleaning liquid can be discharged through the drain.
Notice
• Do not start the device without cleaning liquid in the tank.
The cleaning fluid level should meet the requirements to avoid being too high or too low.
• The set temperature must not exceed 80 ° C.
• Please use the matching special net basket to hold cleaning items.
• The muffler cover should be covered when the equipment is working.
• Please pay attention to safety when draining to avoid burns or splashing of cleaning liquid.
Before cleaning and maintaining equipment, make sure the power is disconnected.
