Overview
SB-800DT ultrasonic cleaner is a device produced by JINGQI with an inner slot size of 500 * 300 * 200mm and a capacity of 30L. The device uses digital display to set the ultrasonic cleaning time and has the function of working time countdown display. The instrument adopts a stainless steel shell and a sound-lowering cover, and is equipped with a special stainless steel mesh basket.
Features
1. Digital display to set the ultrasonic cleaning time, Working time countdown display.
2. Real-time display of the actual temperature in the cleaning tank.
3. Wide range of temperature settings from room temperature to 80 ° C.
4. Working time settings of 1-99 minutes.
5. Adopt microcontroller software to control the operation program.
6. With power-off memory function for working parameters.
7. The inner and outer shells of the instrument and the lower cover are made of good stainless steel.
8. Equipped with a special stainless steel net basket and a flat cover.
9. Equipped with drainage function.
Principle
The ultrasonic cleaner drives the transducer through high-frequency electrical signals to generate ultrasonic waves with a Frequency of 40KHz. When ultrasonic waves propagate in the cleaning liquid, they produce a cavitation effect, forming countless tiny bubbles and instantly bursting, generating an Impact force, thereby disbonding the dirt attached to the surface of the object to achieve the purpose of cleaning. The device has a built-in heating system that can heat the cleaning liquid to a set temperature (room temperature to 80 ° C) to enhance the cleaning effect.
Applications
The information does not mention specific Applications.
Standards
The data did not mention meeting the standards.
Steps
1. Put the items to be cleaned into a special stainless steel mesh basket and place them in the cleaning tank.
2. Add an appropriate amount of cleaning liquid to the cleaning tank.
3. Set the required cleaning temperature (room temperature to 80 ° C) through the control panel.
4. Set the cleaning time (1-99 minutes) through the control panel.
5. Start the equipment and start ultrasonic cleaning and heating.
6. The countdown and real-time temperature display can be observed during the cleaning process.
7. After cleaning, take out the net basket and items.
8. After use, the cleaning liquid can be drained through the drainage function.
Notice
• Do not activate the ultrasonic and heating functions without cleaning fluid.
The cleaning fluid level should cover the items being cleaned, but should not exceed the maximum water level.
The set temperature should not exceed 80 ° C.
• Please use the special net basket and flat cover provided with the equipment.
Equipment should be placed on a smooth, well-ventilated countertop for use.
• When cleaning corrosive or flammable items, choose the appropriate cleaning solution and pay attention to safety.
• When the equipment is not used for a long time, please empty the cleaning liquid and keep it drying.
