Overview
SB-5200DT ultrasonic cleaner is a digital display cleaning equipment produced by JINGQI. The equipment adopts stainless steel shell and sound lowering cover, and is equipped with a special stainless steel net basket. It has functions such as temperature and time setting, real-time display and power-off memory of working parameters.
Features
1. Digital display to set the ultrasonic cleaning time, Working time countdown display.
2. Real-time display of the actual temperature in the cleaning tank.
3. Wide range of temperature settings from room temperature to 80 ° C.
4.1-99 minutes Total Working time setting.
5. Working parameters with power-off memory function.
6. The inner and outer shells of the instrument and the lower cover are made of good stainless steel.
7. Equipped with a special stainless steel net basket and a flat cover.
8. The operating program is controlled by microcontroller software.
Principle
The ultrasonic cleaner converts electrical energy into high-frequency mechanical vibration (Frequency is 40KHz) through its internal transducer to generate ultrasonic waves. When ultrasonic waves propagate in the cleaning liquid, they produce a cavitation effect, forming countless tiny bubbles and instantly bursting, generating Impact force, thereby disbonding the dirt attached to the surface of the object to achieve the purpose of cleaning. At the same time, the equipment is equipped with a heating function, which can assist the cleaning process by heating up.
Applications
Laboratory ware cleaning, Electronic parts cleaning, Precision Hardware cleaning, Jewelry cleaning, Optical inspection lens cleaning, Medical apparatus pretreatment, Auto parts cleaning, Industrial parts degreasing and wax removal
Standards
The data did not mention specific compliance criteria.
Steps
1. Add an appropriate amount of cleaning liquid to the cleaning tank.
2. Put the items to be cleaned into a special stainless steel mesh basket, and then immerse them in the cleaning solution.
3. Turn on the power supply and set the required cleaning temperature (room temperature to 80 ° C) and cleaning time (1-99 minutes) through the control panel.
4. If heating is required, turn on the heating function to the set temperature.
5. Start the ultrasonic cleaning program, the device starts working and displays a countdown.
6. After cleaning is completed, the equipment automatically stops and the items are taken out.
7. After use, the cleaning liquid can be discharged through the drain.
Notice
• Do not start the ultrasonic or heating function without the cleaning liquid in the tank.
• The cleaning fluid level should at least submerge the transducer (usually recommended to submerge items in the basket).
• The set temperature must not exceed 80 ° C.
• Avoid using highly corrosive or flammable cleaning fluids.
• Do not immerse the cleaner in water as a whole for cleaning.
Before moving or cleaning equipment, be sure to disconnect the power supply.
• Do not directly hit the bottom of the cleaning tank with heavy objects to avoid damage to the transducer.
• When not in use for a long time, empty the tank and keep drying.
