Overview
SB-120DT5L ultrasonic cleaner is a product of JINGQI brand. The device adopts stainless steel shell and sound lowering cover, and is equipped with a special stainless steel net basket. It has functions such as digital display setting, temperature control, and regular cleaning.
Features
1. Digital display to set the ultrasonic cleaning time, Working time countdown display.
2. Real-time display of the actual temperature in the cleaning tank.
3. Wide range of temperature settings from room temperature to 80 ° C.
4.1-99 minutes Total Working time setting.
5. Working parameters with power-off memory function.
6. The operating procedures of the instrument are based on microcontroller software.
7. Equipped with a special stainless steel net basket and a flat cover.
8. The instrument's inner and outer casing and sound-lowering cover are made of good stainless steel.
9. Equipped with drainage function.
Principle
The ultrasonic cleaner converts electrical energy into high-frequency mechanical vibration (Frequency is 40KHz) through its internal transducer to generate ultrasonic waves. When ultrasonic waves propagate in the cleaning liquid, they produce a cavitation effect, forming countless tiny bubbles and instantly bursting, generating an Impact force, thereby disbonding the dirt attached to the surface of the object to achieve the purpose of cleaning. At the same time, the equipment is equipped with a heating function, which can enhance the cleaning effect through heating.
Applications
Laboratory ware cleaning, jewelry cleaning, precision parts cleaning, Optical inspection lens cleaning, medical apparatus cleaning, electronic components cleaning
Standards
The data did not mention specific compliance criteria.
Steps
1. Add an appropriate amount of cleaning liquid to the cleaning tank.
2. Put the items to be cleaned into a special stainless steel mesh basket, and then immerse them in the cleaning solution.
3. Cover the bass cover.
4. Set the required cleaning temperature (room temperature to 80 ° C) and cleaning time (1-99 minutes) through the control panel.
5. Start the device, start cleaning, and the screen will display a countdown and real-time temperature.
6. After cleaning is completed, take out the items, and if necessary, use the equipment drainage function to empty the cleaning liquid.
Notice
• Do not start the ultrasonic and heating functions without the cleaning liquid in the tank.
The cleaning fluid level should at least submerge the transducer (usually recommended to submerge the bottom of the basket), but it should not be too full.
• Do not use flammable, explosive or corrosive liquids as cleaning liquids.
• When heating, the temperature of the cleaning tank and liquid will rise, please pay attention to avoid burns during operation.
• Do not splash water or cleaning fluid on the control panel to prevent short circuits.
• After cleaning, please empty and clean the cleaning tank in time.
• When not in use for a long time, please keep the equipment drying.
Do not disassemble or modify the equipment without authorization.
