Overview
SB-120DT3L ultrasonic cleaner is a laboratory and industrial cleaning equipment produced by JINGQI. This model has a 3L cleaning capacity, uses 40KHz ultrasonic Frequency, and is equipped with a digital display control panel, which can achieve 1-99 minutes of regular cleaning and temperature setting from room temperature to 80 ° C.
Features
1. Digital display to set the ultrasonic cleaning time, Working time countdown display.
2. Real-time display of the actual temperature in the cleaning tank.
3. Wide range temperature setting from room temperature to 80 ° C.
4.1-99 minutes Total Working time setting.
5. Working parameters with power-off memory function.
6. Equipped with a special stainless steel net basket and a flat cover.
7. The instrument's inner and outer casing and sound-lowering cover are made of good stainless steel.
8. The operating procedures of the instrument are controlled by microcontroller software.
Principle
The ultrasonic cleaner converts electrical energy into high-frequency mechanical vibration (40KHz) through its internal transducer, generating dense tiny bubbles (cavitation effect) in the cleaning liquid. These bubbles generate a strong impact force when they burst, acting on the surface and fine pores of the object to be cleaned, thereby disbonding and removing impurities such as dirt and grease attached to them. At the same time, the equipment is equipped with a heating function, which can enhance the cleaning effect by heating the cleaning liquid.
Applications
Laboratory ware cleaning, Electronic components, Precision parts, Jewelry, Optical inspection lenses, Medical apparatus, Hardware tools
Standards
The data did not mention specific compliance criteria.
Steps
1. Add an appropriate amount of cleaning liquid to the cleaning tank.
2. Put the items to be cleaned into a special stainless steel mesh basket and immerse them in the cleaning solution.
3. Cover the bass cover.
4. Set the required cleaning temperature (room temperature -80 ° C) and cleaning time (1-99 minutes) through the digital display panel.
5. Start the device, start cleaning, and the panel will display a countdown and real-time temperature.
6. After cleaning, remove the items and handle the cleaning solution as required.
Notice
• Before use, please ensure that the liquid level in the cleaning tank is appropriate to avoid dry burning.
• Do not use flammable, explosive or corrosive liquids as cleaning agents.
• Cleaning items should be properly placed to avoid direct contact with the bottom of the cleaning tank.
When setting the temperature, do not exceed the upper limit of 80 ° C.
• The equipment does not have a drainage function, and manual treatment is required when changing the liquid.
• Do not put your hands into the cleaning liquid during operation to prevent burns or ultrasonic damage.
• Regularly clean equipment and keep ventilated drying.
