Overview
QL-500 ozone aging test chamber is a professional test equipment of ZKHS brand, which is suitable for aging test of non-metallic materials against sunlight and artificial Illuminant. The box body is processed by numerical control machine tool, which is beautiful and easy to operate.
Features
1. The box body is processed and formed by numerical control machine tool, and the shape is beautiful and generous. The box cover is the side reverse buckle handle type, which is easy to operate
2. The inner tank of the box is made of imported stainless steel plate, and the outer shell of the box is sprayed with A3 steel plate, which increases the appearance, texture and cleanliness
3. The heating method is electric heating wire heating, which heats up quickly and has a uniform temperature distribution
4. Using PT100 temperature transducer, imported instrument control heating, temperature is more stable
5. Lighting can be controlled independently and can be controlled alternately
6. The lighting control time and the alternating control time can be arbitrarily set within 0~ 999H
7. Equipped with 360 degree swirl/spin sample holder, 1 rpm
8. With leakage, short circuit, overtemperature, motor overheating, overcurrent protection and other safety protection functions
Principle
The equipment achieves rapid heating through electric heating wire heating, and uses PT100 temperature transducer and imported instruments to control the heating system to ensure temperature stability. The lighting system can be independently controlled or alternately cycled. The ozone generator uses a silent discharge tube to generate ozone, and the ozone concentration is monitored in real time through imported concentration analysis regulators.
Applications
Testing of Non-metallic Materials for Resistance to Sunlight and Illuminant aging
Standards
GB/T16777-2008、GB/T12967.4-2014
Steps
1. Set the lighting control time and alternate control time (within the range of 0~ 999H)
2. Set the test time (0~ 9999 M, H adjustable)
3. Select the specimen state (dynamic or static)
4. Set the temperature range (RT + 10 ℃~ 70 ℃ or 0 ℃~ 70 ℃)
5. Set humidity range (65%~ 98% R.H or 40%~ 98% R.H)
6. Set the ozone concentration range (low concentration 10~ 1000PPhm or high concentration 1~ 500PPm)
7. Start the equipment and start the test
Notice
• Power frequency must be AC380V +/- 10% 50Hz three-phase five-wire system
• Pay attention to observe Temperature Fluctuations during the test to ensure that it is within the range of +/- 0.5 ° C
• Fluctuations in humidity should be controlled within the range of + 2, -3% R.H
Fluctuations in ozone concentration should be controlled within the range of +/- 10%
• Gas flow rate should be maintained at 12~ 16mm/s
• Pay attention to whether the safety protection function of the equipment is normal
• Regularly check whether the sample rack speed is 1rpm.
• Note that the total power of the equipment is 6.5KW when operating
