Overview
GDW-800B low/high temperature test chamber is produced by ZKHS, suitable for aerospace products, information electronic Instruments, materials, electrical, electronic products and various electronic components in high and low temperature or heat and humidity environment inspection of its performance indicators. The equipment adopts advanced structural design and control system to ensure a stable and reliable test environment.
Features
1. The box is processed by numerical control machine tool, which is beautiful and easy to operate
2.The liner adopts imported stainless steel (SUS304) mirror plate, and the shell adopts A3 steel plate spray
3. Large observation window with lighting, clear observation of the situation in the box
4. The humidification system piping is separated from the control circuit board to improve safety
5. The pipeline circuit system of the water system adopts door opening, which is convenient for maintenance and repair
6. The box body insulation adopts ultra-fine fiberglass insulation cotton to avoid energy loss
7. Equipped with a 50mm diameter test hole, it can be used for external test power cord or signal cable
8. The temperature and humidity control instrument adopts a 7.0-inch large screen, which is easy to operate and easy to edit programs
9. Capacity with 100 sets of programs and 1000 segments of 999 cycle steps
10. With RS-232 or RS-485 communication interface, you can design programs on the computer
11. The refrigerator adopts the original French "Taikang" fully enclosed Compressor
12. Multi-wing blower is used for strong air circulation, with uniform temperature and humidity distribution
Principle
The equipment adopts unit or binary low temperature circuit system design through the refrigeration system, and cooperates with the strong air supply circulation of the multi-wing blower to distribute the temperature and humidity evenly in the test area. The temperature and humidity control instrument has the function of automatic calculation, which can immediately correct the temperature and humidity change conditions, so that the temperature and humidity control is more accurate and stable. The air circuit circulation air outlet and return air design can make the temperature and humidity stabilize quickly at the moment of opening the door.
Applications
Aerospace Products, Information Electronic Instruments, Materials, Electrical, Electronic Products, Various Electronic Components
Standards
GB/T10592－2008、GB/T10586－2006、GB/T2423.1－2008、GB/T2423.2－2008、GB/T2423.3－2006、GB/T2423.4－2008、GJB150.3A-2009、GJB150.4A-2009
Notice
• Operating Environment Temperature should be in the range of 5 ℃~ + 30 ℃
• Operating Environment Humidity ≤ 85% R.H
• Power frequency AC280V +/- 10% or AC380V +/- 10% 50Hz three-phase five-wire system
• The equipment has the functions of leakage, short circuit, overheating, motor overheating, Compressor overvoltage, overload and overcurrent protection
• The replenishment tank has the function of automatic protection for water shortage, and the water source needs to be replenished in time
• The controller has a screen lock function to avoid shutdown due to human touch
