Overview
The RDS 33 #1/4 Forming Applicator rod is a professional Spreader tool with a film Film thickness of 75.4 microns and a Spreader width of 30cm. The product is made of 303 stainless steel, which is durable and not easy to rust. It is a molded design without winding steel wires, which solves the problem of cleaning trouble and easy blockage of traditional wire-wound Spreader rods.
Features
1. Made of 303 stainless steel, it is not easy to break the wire and rust, and has a long service life
2. Molded design, no need to wrap steel wire, avoid cleaning difficulties and impurity blockage
3. Accurate film Film thickness of 75.4 microns, Spreader width of 30cm
4. Production process formed to ensure uniform and stable Spreader
5. It has a good reputation in the industry and is a leading product
Principle
The Applicator rod is formed by a formed production process and rolls on the surface of the substrate to form a uniform wet-film coating. Its molded structure avoids the problem of clogging of traditional wire-wound rods, ensuring smooth Spreader process and accurate control of coating thickness at 75.4 microns.
Applications
Paint Spreaders, Laboratory Research, Industrial Production Spreaders
Standards
industry standard
Steps
1. Spreader substrates and coatings
2. Applicator rod placed at the starting end of the substrate
3. Apply pressure evenly and roll Applicator rod
4. Move in a straight line to complete the Spreader
5. Clean Applicator rod for next use
Notice
• Clean in time after use to avoid paint residue
• Avoid scratching the surface of Applicator rod with hard objects
Keep drying during storage to prevent rust
• Ensure uniform Spreader pressure during operation
• Only used within the specified Spreader width
