Overview
HZAOC SO2-250 SO2 corrosion test chamber is a special corrosion gas test equipment for parts, electronic components, metal material protective layer and industrial products. The equipment is made of corrosion-resistant materials and has precise sulfur dioxide concentration control and temperature regulation functions to ensure test reliability and repeatability.
Features
1, the box using 8mm Film thickness PVC reinforced rigid plastic plate, corrosion resistance, easy to clean; 2, the door is 8mm tempered Glass, easy to observe; 3, heating using titanium alloy heating tube, heating fast and uniform temperature; 4, the control system using High Accuracy digital temperature controller, with power-off memory function; 5, sulfur dioxide concentration through the flow meter precise control, high measurement accuracy; 6, equipped with multiple protection systems, including over-temperature, low water level, overload and other automatic shutdown protection; 7, waste gas by alkali solution filtrate treatment, environmental protection and no pollution.
Principle
The test chamber generates sulfur dioxide gas by the cylinder method, and uses a Glass rotor flowmeter to precisely control the gas flow, and the concentration range is adjustable. The heating system adopts liner air heating, which is quickly and evenly heated by a titanium alloy heating tube. The control system monitors the temperature through the corrosion resistance Sensor, and the time relay sets the test duration. The exhaust gas is discharged through compressed air and the alkali is filtrated.
Applications
Corrosive gas testing of parts, electronic components, protective layers of metal materials, and industrial products
Standards
GB/T2423.33-2005、DIN 50018、GB/T9789-88、GB5135.1-2003、GB5135.3-2003
Steps
1. Connect the sulfur dioxide cylinder and check the sealing property; 2. Adjust the sulfur dioxide concentration to the required range through the flow meter; 3. Set the temperature controller and target temperature; 4. Set the time relay to control the test duration; 5. Start the equipment to start the test; 6. After the test, the exhaust gas is treated through the compressed air waste system.
Notice
* Ensure that the cylinder is self-equipped and the gas purity is 99.99% before use; * Regularly check the sealing strip of the box to prevent gas leakage; * Avoid over-temperature operation, pay attention to the alarm of the equipment protection system; * Waste gas treatment needs to ensure that the alkali solution is effective to prevent environment pollution; * Wear protective equipment during operation to avoid direct contact with corrosive gases.
