Overview
The DHG-9141 electric thermostatic drying oven is a blower drying equipment with a volume of 140 liters. The shell is welded with good steel plate and the surface is lame plated. The inner chamber is lame plated steel plate with high temperature silver powder paint, with two to four shelves. The door is equipped with a double-decked Glass observation window to ensure good temperature insulation and sealing. The drying oven integrates an electric heater, a microcomputer intelligent temperature control instrument, a fan and an optimized air duct structure, which is designed to provide a uniform and stable high temperature drying environment for laboratories, industrial production and other scenarios.
Features
1. Using microcomputer smart digital temperature control instrument, with self-tuning function, high temperature control accuracy.
2. Progressive heating design effectively suppresses temperature overshoot.
3. Set the temperature with a protective device and a tracking alarm function for high safety.
4. The box is equipped with a fan and a suitable air duct structure to ensure uniform temperature in the studio.
5. The box door is equipped with double-decked Glass observation window, which is convenient for observing the internal conditions without affecting the temperature.
6. The thermal insulation layer is made of ultra-fine Glass cotton, which has good thermal insulation effect.
7. Operating components (power switch, temperature controller) are centralized in front of the box for easy operation.
Optional RS-485 Communication interface for remote monitoring and data collection.
Principle
The heating thermostatic system of the drying oven consists of an electric heater, a temperature controller, a fan and an air duct structure. After the power is turned on, the fan starts to work and drives the air flow. The heat generated by the electric heater is discharged through the air duct, flows through the items that need to be dried in the work room, and is then re-sucked by the fan to form a continuous hot air circulation. The microcomputer intelligent temperature control instrument monitors and adjusts the Heating power in real time. Through progressive heating and self-tuning functions, the studio temperature quickly reaches the set value and maintains a high degree of uniformity and stability.
Applications
Laboratory, industrial production, material drying, sample baking, component aging testing
Steps
1. Place the drying oven in a smooth, well-ventilated environment.
2. Turn on the power supply (220V 50Hz) and turn on the power switch.
3. Set the required temperature (range: RT + 10~ 300 ° C) and timing time (range: 1~ 9999 minutes) through the microcomputer intelligent temperature controller.
4. Start the equipment, the fan starts running, and the heating system starts to work.
5. Place the items to be dried evenly on the shelf and close the box door.
6. The equipment will automatically run until the set time or temperature, and can be viewed through the observation window during the process.
7. After the work is completed, turn off the power supply and take out the items after the temperature in the box naturally chills down.
Notice
Equipment should be placed in a drying, stable, non-corrosion gas environment.
• Do not put flammable, explosive, volatile and corrosion items into the box for drying.
• When placing items, do not block the outlet and inlet of the air duct to ensure smooth air circulation.
• When taking and placing items, please be careful to avoid burns.
• When the equipment is running, do not open the door for a long time, so as not to affect the Temperature uniformity and equipment life.
• When cleaning the box, please cut off the power first, wipe it with a soft cloth, and avoid using corrosion cleaners.
• If not used for a long time, please cut off the power supply and keep the box clean and drying.
