Overview
HZAOC SC-010 Dust test chamber is a test equipment used to simulate the dust climate environment, mainly for electrical, electronic, automotive, Motorcycle and Miscellaneous products parts dust test.
Features
1. Adopt large-diameter stainless steel centrifugal wind wheel plus dust stirring and drying mechanism to effectively absorb dust.
2. Using a micro-eccentric motor for vibration makes dust shaking more effective.
3. The bottom of the box funnel is equipped with a dust cleaning discharge port, which is convenient for dust cleaning and replacement.
4. It has a bright and clear large observation window and is equipped with lighting, with a wide field of vision, which is convenient for observing the dust concentration and dust volume in the box.
5. Matte black three-dimensional control panel, man-machine interface and control switch layout eye-catching, easy to operate.
6. Using a new generation of Xinjie PLC all-in-one machine (touch key man-machine interface + PLC) as the controller, the system is stable and reliable, and the man-machine dialogue input method is adopted, which is easy to operate.
7. The equipment is equipped with a dust drying heating device, which can dry humid dust during the test process to ensure the accuracy of the dust concentration and test data in the test chamber.
8. Equipped with power component anti-overload protection, equipment phase loss and phase sequence protection, the controller has an alarm screen prompt when the protection action is taken.
Principle
The device sucks in dust through a large-diameter stainless steel centrifugal wind wheel and combines it with a dust stirring mechanism to form a uniform dust environment in the box. The dust is kept suspended by the vibration of the micro eccentric wheel motor. The device can heat and dry the dust in the box to maintain the dust concentration required for the test, thereby simulating the working state of the product in the dust climate.
Applications
Dust testing of electrical, electronic, automotive, Motorcycle and Miscellaneous parts
Standards
GB/T 2423.37-06、GB4208-08、GB2423.37-89La、GB7001-86、GB10485-89、GB/T4208-93、GB/T2423.37-89
Steps
1. Prepare the specimen and place it in the box.
2. On the human-machine interface of the controller, set the test parameters in the order indicated by the display screen.
3. Start the equipment and start the dust and sand test.
4. During the test, if you need to dry the dust, you can start the heating button on the control screen.
5. After the test, close the equipment and clean the dust through the bottom discharge port.
Notice
* The test dust is a drying tale powder that can pass through a square hole sieve with a sieve hole of 75 µm and a wire diameter of 50 µm.
* Vacuum system is optional, please specify when ordering.
The vacuum pump needs to be equipped by the customer.
* If the dust is found to be wet during the test, the heating device that comes with the equipment can be used for drying.
* Safety protection prompt, such as alarm screen, please check whether the relevant protection function is triggered.
