Overview
JINGQI MHP-250 mildew incubator is a specialized equipment for mold fostering, using a microcomputer intelligent control system, equipped with stainless steel liner and UV sterilization lamp, providing precise temperature control and a clean foster environment.
Features
1. Microcomputer intelligent control, with monitoring, temperature control and protection functions
2. Professional refrigeration technology, good cooling effect, the four corners of the inner tank of the box are semi-circular arcs
3. Dual temperature display function, can observe the set temperature and the measured temperature at the same time
4. Low temperature compensation function, improve the temperature control accuracy when working at low temperature
5. Equipped with ultraviolet sterilization lamp, you can observe the foster in the box
6. Stainless steel liner, corrosion resistant
Principle
Through the microcomputer intelligent control system to accurately adjust the temperature of the box, the use of professional refrigeration technology implementation of rapid cooling, equipped with ultraviolet sterilization lamp to disinfect the environment in the box, to ensure the clean and thermostatic conditions required for mold fostering.
Applications
Mold fostering, microbial experiment, scientific research and teaching
Standards
Power standard: 220V 50Hz
Steps
1. Connect the 220V 50Hz power supply
2. Set the required temperature through the microcomputer controller
3. Turn on the ultraviolet sterilization lamp for disinfection in the box
4. Place the foster on the shelf
5. Start the equipment to start fostering
Notice
• Power frequency 220V 50Hz before use
• Regularly clean the stainless steel liner
• Pay attention to the safety of the use of ultraviolet sterilization lamps
• Ambient Temperature should be in the range of 5-35 ℃
• Avoid overloading shelves
