Overview
MHP-300 mildew incubator is JINGQI brand professional microbial foster equipment, using microcomputer intelligent control system, with precise temperature control and monitoring functions. The equipment adopts stainless steel liner design and is equipped with ultraviolet sterilization lamp, which is suitable for all kinds of mold fostering experiments.
Features
1. Microcomputer intelligent control, with monitoring, temperature control and protection functions
2. Professional refrigeration technology, good cooling effect, the four corners of the inner tank of the box are semi-circular arcs
3. Dual temperature display function, can observe the set temperature and the measured temperature at the same time
4. Low temperature compensation function, improve the temperature control accuracy when working at low temperature
5. Equipped with ultraviolet sterilization lamp, you can observe the foster in the box
6. Stainless steel liner, corrosion resistant
Principle
Mildew incubator precisely adjusts the temperature in the box through the microcomputer intelligent control system, and adopts professional refrigeration technology implementation to quickly cool down. The equipment monitors the temperature in the box in real time through the temperature transducer, and ensures the temperature control accuracy in the low temperature environment through the low temperature compensation function. The ultraviolet sterilization lamp can sterilize the box, and the stainless steel liner ensures the long-term stable operation of the equipment.
Applications
Mold fostering, microbial experiment, scientific research and teaching, biopharmaceutical
Standards
Comply with relevant electrical safety standards
Steps
1. Connect the 220V 50Hz power supply
2. Set the required temperature parameters through the microcomputer controller
3. Set Timer Range 1-9999 minutes
4. Turn on the ultraviolet sterilization lamp for disinfection in the box
5. Place the foster on the shelf
6. Start the equipment to start fostering
Notice
• Operating Environment Temperature should be within 5-35 ℃
• The power of the equipment is 1000W, and it is necessary to ensure that the power supply is stable
• Regularly clean the stainless steel liner
• Avoid direct gaze when using UV sterilization lamps
• Do not open the door frequently during the operation of the equipment
• Please disconnect the power supply when not in use for a long time
