Overview
Pottery and porcelain fiber muffle furnace with SX2-16-10TP integrated Pottery and porcelain fiber muffle furnace and multi-faceted heating elements, with uniform temperature distribution, fast heating speed, energy saving significant characteristics, energy saving rate of 40%, tested to reach the C furnace standard. The equipment adopts LCD program control instrument, microcomputer intelligent control, temperature control is accurate and stable, and has perfect safety protection function.
Features
1. Pottery and porcelain fiber furnace and multi-sided heating element, good temperature distribution uniformity
2. Fast heating speed, significant energy saving, energy saving rate of 40%
3. LCD program control instrument, high luminance and wide window digital display
4.30-Stage programming setting, suitable for complex experimental processes
5. Microcomputer intelligent control to solve the problem of temperature overshoot
6. Multiple safety protection: fault sound and light alarm, over-temperature sound and light alarm, automatic cutting off heating output, opening the door to stop heating
7. The outer shell adopts cold plate after phosphoric acid film salt treatment, high temperature spray, Color is computer gray
Principle
The muffle furnace adopts K-indexed nickel-chromium-nickel-silicon Thermocouple for temperature measurement through PID adjustment control system. The heating element is a high-temperature resistance wire, and the temperature in the furnace is evenly distributed through multi-sided heating. The control system can be programmed in the full range, and the 30-segment program can be set to automatically control the heating and thermostatic process.
Applications
Laboratory heat treatment, material sintering, sample ashing, high temperature experiment, industrial heat treatment
Standards
Class C furnace standard
Steps
1. Set the required temperature parameters
2. Set the heating rate (1-30 ° C/min)
3. Set working hours program
4. Start the device to start heating
5. Equipment automatically controls the thermostatic process
6. Automatic shutdown after thermostatic time
Notice
• Do not open the furnace door at will when the equipment is running
• Pay attention to the over-temperature alarm prompt and deal with it in time
• Power frequency meets equipment requirements (380V 50Hz)
• Regularly check the status of Thermocouples and heating elements
• Keep equipment well ventilated
• Automatically cut off the heating output when the equipment fails, it needs to be checked and troubleshooted before use
