Overview
HN-E series torque tester is an intelligent multi-functional Measurement instrument specially designed and manufactured to detect the torque of equipment with high speed and Impact force torsion. It is mainly used to detect the tightness of the workpiece and the torsional performance of some components, and is also used for the measurement and correction of the torque and torque setting of various electric batches, wind batches, torque batches, and torque wrench. The instrument adopts electronic Sensor technology, which has the advantages of high accuracy, easy operation, high Sensitivity, and reliable data. It is widely used in various mass detection, physical experiments, engineering testing and other fields. It is equipped with a special host computer operating software to connect to the computer for data storage, analysis, export, query and printing.
Features
1. High Accuracy, high resolution, high stability, sampling speed up to 1920HZ
2. Special Instrument Toolbox with EVA Shockproof Encasement, Easy to Transport, Save and Carry
3. Segment LCD display, green backlight screen
4. Three units N.m, kgf.cm, lbf.in automatic conversion
5. Test direction display (counterclockwise +, clockwise -)
6. Three test modes: real-time torque value tracking mode, peak hold mode, first peak mode
7. Can set the upper and lower limit comparison value to judge whether the data is qualified or not, with sound alarm and level signal output
8. Store 99 sets of test data and automatically calculate the average value of the stored data, MAX Maximum and MIN Minimum.
9. Peak hold time can be set (can be set from 0 to 99 seconds)
10. Gravity acceleration value can be set
11. Automatic shutdown without operation can be set (time can be set freely from 0 to 99 minutes)
12. Using intelligent charging, safe charging, prolong battery life
13. Host computer software: Chinese WINDOWS interface
14. Linear dispersion of test results: real-time torque value - time, peak torque value - times, first peak - times
15. Qualification judgment: In addition to automatically obtaining test results, qualified judgment and batch testing pass rate can also be made according to the qualified range of preset standard values
16. Automatic storage: Test data and Linear dispersion are automatically stored in the computer, and the number of storage is unlimited
17. Test data: The data obtained from the test can be queried and exported in excel format
18. Test report: Test report can be prepared in the format required by the user, form a report and print it
Principle
The instrument uses electronic Sensor technology for torque measurement, collects torque data in real time through High Accuracy Sensor, and uses built-in processor for data processing and display. Supports a variety of test modes, including real-time tracking, peak hold, and first peak mode, which can automatically convert units and judge data qualification.
Applications
Mass inspection, physical experiment, engineering test
Standards
JB/T5483-2015 standard torque meter technical specification, JJG_557 -2011 standard torque meter
Notice
• operation temperature range is 0~ 40 ℃, storage temperature is -20 ℃ -70 ℃
• relative humidity should be in the range of 15% -80%
• The working environment needs no vibration and corrosive medium around
• Use designated charger: AC Input 220V/50HZ, DC Output 5V/1A
• Note that the battery is a lithium battery Lion Batery: 3.7V/1000mAh
