Overview
HN-10E digital high-speed torque tester is an intelligent multi-functional Measurement instrument designed by HBO for detecting the torque of high-speed and impact torsion equipment. It is mainly used to detect the tightness of the workpiece, the anti-torsional performance of the component, and the measurement and correction of various electric batches, wind batches, torque batches, and torque wrench torque and torque setting conditions. It has the advantages of high accuracy, easy operation, high Sensitivity, and reliable data.
Features
1. High Accuracy, high resolution, high stability, sampling speed 1920HZ
2. Special Instrument Toolbox with EVA Shockproof Encasement, easy to transport, store and carry
3. Segment LCD display, green backlight screen
4. Three units N.m, kgf.cm, lbf.in automatic conversion
5. Test direction display (counterclockwise +, clockwise -)
6. Three test modes: real-time torque value tracking mode, peak hold mode, first peak mode
7. Can set the upper and lower limit comparison value to make data qualified judgment, with sound alarm and level signal output
8. Store 99 sets of test data, automatically calculate the average, MAX Maximum, MIN Minimum
9. Peak hold time can be set (0 to 99 seconds)
10. Gravity acceleration value can be set
11. Automatic shutdown without operation can be set (0~ 99 minutes)
12. Use intelligent charging, safe charging to extend battery life
13. Host computer software: Chinese WINDOWS interface
14. Linear dispersion of test results: real-time torque value - time, peak torque value - times, first peak - times
15. Qualification judgment: automatically judge the qualification and batch inspection pass rate according to the preset standard value
16. Automatic storage: Test data and Linear dispersion are automatically stored to the computer, and the number of storage is unlimited
17. Test data: Query and export in excel format
18. Test report: prepared and printed according to user requirements
Principle
The instrument uses electronic Sensor technology, real-time detection of torque signals through High Accuracy Sensor, combined with intelligent processing system for data collection, analysis and display, to achieve accurate measurement of torque and multi-functional mode operation.
Applications
Mass inspection, physical experiment, engineering test
Standards
JB/T5483-2015 standard torque meter technical specification, JJG_557 -2011 standard torque meter
Steps
1. Connect devices and ensure the working environment meets requirements
2. Set test mode, unit, upper and lower limits and other parameters as needed
3. Perform torque test operation
4. View real-time data or peaks through the monitor or host computer software
5. Store test data and automatically calculate statistical values
6. Use PC software for data analytics, export and report generation
Notice
• operation temperature range is 0~ 40 ℃, storage temperature is -20 ℃ -70 ℃
• relative humidity should be kept at 15% -80%
• The working environment needs no vibration and corrosive medium around
• Charge with the designated charger, input AC 220V/50HZ, output DC 5V/1A
• Avoid using the instrument outside the range
Periodically calibrated to ensure measurement accuracy
