Overview
HN-50C digital dynamic torque tester is an intelligent Measurement instrument produced by HBO, specially designed to detect various swirl/spin dynamic torque. The instrument is used to detect the torque change of motors, gear reducers and other products during the working process. It adopts electronic Sensor technology and has the advantages of high accuracy, easy operation, high Sensitivity and reliable data. It is equipped with special host computer software to connect to the computer to realize data storage, analysis, export, query and printing functions.
Features
1. High Accuracy and high resolution, high stability
2. Segment LCD display, green backlight screen
3. Three units N.m, kgf.cm, lbf.in automatic conversion
4. Test direction display (counterclockwise +, clockwise -)
5. Three test modes: real-time torque value tracking mode, peak hold mode, first peak mode
6. Can set the upper and lower limit comparison value to judge whether the data is qualified or not, with sound alarm and level signal output
7. Store 99 sets of test data and automatically calculate the average value of the stored data, MAX Maximum and MIN Minimum.
8. Peak hold time can be set (can be set from 0 to 99 seconds)
9. Gravity acceleration value can be set
10. Automatic shutdown without operation can be set (time can be set freely from 0 to 99 minutes)
11. Adopt external smart charger, which can charge safely and prolong battery life
12. Serial output (baud rate 9600)
13. Host computer software: Chinese WINDOWS interface
14. Linear dispersion of test results: real-time torque value - time, peak torque value - times, first peak - times
15. Qualification judgment: In addition to automatically obtaining test results, qualified judgment and batch testing pass rate can also be made according to the qualified range of preset standard values
16. Automatic storage: Test data and Linear dispersion are automatically stored in the computer, and the number of storage is unlimited
17. Test data: The data obtained from the test can be queried and exported in excel format
18. Test report: Test report can be prepared in the format required by the user, form a report and print it
Principle
HN-50C digital dynamic torque tester adopts electronic Sensor technology to detect dynamic torque, collects torque data in real time through Sensor, and uses built-in processor for data processing and display. The instrument can be connected to the host computer software to realize further analysis, storage and management of data.
Applications
Motor and gear reducer
Steps
1. Connect Sensors and Test Equipment
2. Power on the instrument
3. Set the test mode (real-time torque tracking mode, peak hold mode or first peak mode)
4. Set the unit (N.m, kgf.cm or lbf.in)
5. Set the upper and lower limit comparison value, peak holding time, gravitational acceleration value or automatic shutdown time (if required)
6. Start the test and observe the display data
7. Use the host computer software to connect to the computer for data storage, analysis, export, or printing
Notice
• operation temperature range is 0~ 40 ℃, storage temperature is -20 ℃ -70 ℃
• relative humidity should be kept at 15% -80%
• The working environment needs no vibration and corrosive medium around
• Charge with an external smart charger to extend battery life
• Power frequency of lithium battery 3.7V/1000mAh, charger input AC 220V/50HZ, output DC 5V/1A