Overview
The HBO FS-V anemometer is a multi-function measuring instrument that not only measures wind speed, but also air temperature, wave height, wind level and air volume. It uses high Sensitivity and accurate measurement technology, Sensor uses ultra-low friction bearings, supports multi-measurement unit conversion, and has data storage and communication functions.
Features
1. Multifunctional measurement: can measure parameters such as wind speed, wind temperature, wave height, wind level and air volume
2. Multi-measurement unit conversion: support m/s, km/h, ft/min, knots and other units
3. High Accuracy measurement: Super Low Friction Bearing Sensor for High Sensitivity and accuracy
4. Separate design: wind speed measurement handle can be separated from the fuselage, convenient measurement operation
5. Data retention function: with MAX Maximum retention function
6. Data storage: can store 24 sets of measurement data
7. Intelligent energy saving: You can set the automatic shutdown time of 0 to 9 minutes by yourself
8. Multiple communication methods: USB data cable output, RS-232C data cable and software communication with PC
9. Optional Bluetooth function: Provide optional configuration Bluetooth Bluetooth ™ data output
Principle
The anemometer detects wind speed and flow through the low friction bearing impeller Sensor, and measures temperature through the thermistor Sensor. The device collects data at a sampling rate of about 1 second, and displays the measurement results on the display screen after internal processing. Data communication with external devices can be carried out through various interfaces.
Applications
Boiler, refrigeration, HVAC, ventilated pipeline, environment monitoring, nautical measurement, weather forecast, field operation, fire department
Steps
1. Install 4 AA batteries
2. Connect the wind speed measurement handle as needed (separable design)
3. Select measurement mode and unit
4. Place the Sensor in the position to be measured for measurement
5. Use MAX Maximum Hold to record peak data
6. Store the measurement data to be saved (up to 24 sets)
7. Connect the PC via USB, RS-232C or Bluetooth for data transmission
8. Set the automatic shutdown time according to the usage
Notice
* Operating ambient temperature range -10~ 60 ° C (14~ 140 ° F)
* Operating Environment Humidity should be less than 80% RH
* Do not use in an environment beyond range
* Regularly check the battery level to ensure measurement accuracy
* Sensor impeller diameter is 72mm, please pay attention to protection when using
* The weight of the device is 260g (including battery and Sensor), pay attention to safety when carrying
* 24 data storage capacity, timely export of important data
