Overview
BOZHEN BZ-203 low temperature thermostatic water tank is a temperature control equipment, widely used in petroleum, chemical industry, electronic instrumentation, physics, chemistry, biological engineering, life science, light industrial food, physical property testing and chemical analysis research departments, colleges and universities, enterprise Quality control and production departments. The equipment provides a hot and cold controlled, uniform and constant temperature field source for users to work, and can be used for constant temperature testing or testing of specimens or produced products. It can also be used as a heat source or cold source for direct heating or cooling and auxiliary heating or cooling.
Features
1. Wide temperature range, Temperature range is -30~ 95 ℃
2. High temperature accuracy, accuracy of +/- 0.1 ℃
3. Tank volume is moderate, 7.5L
4. Equipped with a circulating pump with a flow rate of 6L/min to ensure uniform temperature
5. The heating power is 600W, and the heating efficiency is good
6. Power frequency is 220V, compatible with standard power supply
Principle
The thermostatic tank controls the temperature of the liquid in the tank through the heating and cooling system, and uses a circulating pump to make the liquid flow to ensure uniform and constant temperature. After the user sets the target temperature, the equipment automatically adjusts to maintain a stable temperature field, providing a thermostatic environment for samples or products.
Applications
Petroleum, chemical industry, electronic instrumentation, physics, chemistry, biological engineering, life science, light industry food, physical property testing, chemical analysis, institutions of higher learning, enterprise Quality control, production department
Steps
1. Connect the device to a 220V power supply
2. Add an appropriate amount of liquid to the Tank
3. Set the target temperature within the range of -30~ 95 ° C
4. Start the equipment, and the heating and cooling systems start working
5. Circulating pump operation to ensure uniform temperature
6. Place samples or products for testing or testing
7. Turn off the device and disconnect the power after use
Notice
• Power frequency is 220V to avoid voltage mismatch
• Tank volume is 7.5L, do not add excessive liquid
• The temperature setting must not exceed the range of -30~ 95 ° C
• Regularly check the running status of the circulating pump to prevent blockage
• Clean the equipment in time after use to avoid residues affecting performance
• Non-professionals should not disassemble or repair the equipment
