Overview
BOZHEN BZ-204 low temperature thermostatic water tank is a device that provides heat and cold controlled, uniform temperature constant field source, widely used in petroleum, chemical industry, electronic instrumentation, physics, chemistry, bioengineering, life science, light industrial food, physical property testing and chemical analysis, etc. It is suitable for research departments, universities, enterprises Quality control and production departments, constant temperature test or test of specimens or products, and can also be used as a direct or auxiliary heating/cooling heat source or cold source.
Features
1. Wide temperature range, covering -40 ° C to 95 ° C;
2. High temperature control accuracy, up to +/- 0.1 ℃;
3. Tank volume is moderate, 7.5L;
4. Equipped with a high-efficiency circulating pump, with a flow rate of 6L/min.
5. The heating power is 600W to ensure rapid heating;
6. Power frequency is 220V, adapt to the standard power environment.
Principle
The low temperature thermostatic water tank precisely controls the liquid temperature in the Tank through the built-in heating and cooling system, and uses the circulating pump to maintain the uniform temperature distribution, providing users with a stable temperature environment for the thermostatic test of samples or products.
Applications
Petroleum, chemical, electronic instrumentation, physics, chemistry, biological engineering, life sciences, light industrial food, physical property testing, chemical analysis, research departments, colleges and universities, enterprise Quality control, production departments
Steps
1. Connect the power supply and ensure that the voltage is 220V.
2. Set the required temperature range between -40 ° C and 95 ° C;
3. Start the equipment and the heating system starts working.
4. The circulating pump runs automatically to maintain uniform temperature in the tank.
5. Place the sample or product into the Tank for testing.
6. Monitor temperature accuracy to ensure +/- 0.1 ° C;
7. After the test is completed, turn off the device and disconnect the power supply.
Notice
• Power frequency check meets 220V requirements before use;
• Ensure that the liquid in the Tank is sufficient to avoid dry burning;
The setting temperature should not exceed the equipment range of -40 ° C to 95 ° C.
• Regularly check the operating status of the circulating pump to prevent blockage;
• Avoid touching high or low temperature parts when the equipment is running.
• Clean the Tank in time after the test to maintain hygiene;
• In case of abnormal situation, power off immediately and contact a professional.
