Overview
BOZHEN BZ-12-10TC Pottery and porcelain fiber muffle furnace is an energy-saving resistance furnace with mechatronics design and program control. It adopts high-temperature refractory fiber vacuum forming products as the furnace tank, and the energy saving rate reaches 40%. It has been tested to meet the national C-class furnace standard.
Features
1. Double-decked furnace shell design, hollow insulation, strong ventilated to ensure that the shell is not hot.
2. Pottery and porcelain fiber furnace is used in the furnace, and the heating element is heated on multiple sides, and the temperature distribution in the furnace cavity is good.
3. It has the characteristics of fast heating speed, significant energy saving and high work efficiency, which can improve the experimental environment.
4. Provide a variety of control mode options, including value control and program control.
Principle
This product is a resistance furnace, which is heated by converting electrical energy into heat energy. Pottery and porcelain fiber furnace and multi-sided heating elements are used, combined with a program control system, to achieve precise control and uniform heating of the temperature in the furnace.
Applications
Laboratory heat treatment, material sintering, ash determination, industrial analysis
Standards
National C-class furnace standard
Steps
1. Place the device on a smooth, well-ventilated workbench and connect it to a 380V power supply.
2. Turn on the power switch and set the required temperature program or set temperature through the control panel.
3. Put the sample to be processed into the furnace and close the furnace door.
4. Start the heating program and the device starts to heat up.
5. After the heating process, the furnace temperature can be naturally cooled down to a safe temperature before opening the furnace door to remove the sample.
6. After use, turn off the power switch.
Notice
Equipment should be placed in a smooth, well-ventilated environment.
When connecting the power supply, ensure that the voltage is consistent with the equipment requirements (380V).
• During the heating process and just at the end, the furnace body is at high temperature, do not touch it to prevent burns.
• Before the sample is taken out, wait for the furnace temperature to drop to a safe temperature to avoid burns or damage to the sample due to sudden cooling.
• Do not heat flammable, explosive or toxic items in the furnace.
• Regularly check the power cord and electrical parts of the equipment to ensure safety.
• Non-professional personnel should not disassemble or repair the equipment.
