Overview
The NBD M12 box furnace (model NBD-M1500-12IT) is a high-temperature sintering equipment with a comfortable design and easy operation. It uses a temperature-dependent sintering Linear dispersion display and pre-stores 15 sintering Linear dispersions, which avoids the repeability setting. Combined with the classic style and touch screen graphic interface, it makes the operation simple and intuitive. In addition, its excellent heat dissipation design ensures that the surface temperature of the furnace body is always below 50 ° C during operation, and the shell process is fine, reflecting the adherence to quality.
Features
1. Using high-grade special heating elements, it has good anti-chemical reaction performance between the charge and the heating elements.
2. The furnace cavity is composed of aluminum oxide fiber material with excellent thermal insulation performance.
3. Adopt double-decked furnace shell and additional Air-Cooled device to ensure the safety of shell temperature.
4. The stove top is equipped with an exhaust port.
5. Precise temperature control can be achieved even in the lower temperature range such as the drying process.
6. Pre-store 15 sintered Linear dispersion to avoid repeability modification.
7. Adopt touch screen graphic interface, simple and intuitive operation.
8. Excellent heat dissipation design, the furnace surface temperature is lower than 50 ℃.
Principle
The box furnace generates heat through a built-in special heating element, which heats the furnace composed of aluminum oxide fibers to achieve high temperature sintering or heat treatment process. Its double-decked furnace shell and additional Air-Cooled device work together to effectively dissipate internal heat and ensure the safety of the shell temperature. The intelligent Control system enables precise control and monitoring of the heating process through the pre-stored sintering Linear dispersion and touch screen interface.
Applications
Material sintering, heat treatment, drying process, scientific research experiment
Steps
1. Select or set the desired Sintering Linear dispersion through the touchscreen graphic interface.
2. Put the material to be processed into the furnace.
3. Start the equipment and start the heating process.
4. Linear dispersion of sintering with temperature is monitored through the interface.
5. After the process is completed, take out the material after the furnace body is chilled down.
Notice
• The furnace surface temperature may be high when working, please pay attention to safety and avoid burns.
• Make sure the furnace roof exhaust is unobstructed.
• Do not operate beyond the maximum temperature of the equipment at 1500 ° C.
• When placing and using the equipment, please pay attention to its weight (55kg) and Dimensions.
• Please be familiar with the use of the touch screen interface before operation.
