Overview
NBD NBD-O1200-80IIT-150 is an open multi-temperature zone tube furnace with a maximum Operating temperature of 1200 ° C, designed to meet various CVD process requirements. It uses an intelligent Control system to integrate the control instruments of multiple temperature zones. Users can easily complete all parameter settings through Touchscreen, which is beautiful and practical.
Features
1. Intelligent Control system: The multi-temperature zone control instrument is integrated, and all parameter settings can be completed through Touchscreen, which is easy to operate.
2. Flexible temperature zone configuration: multiple temperature zones can be set to the same temperature point and used as an extended single temperature zone.
3. Classic design: Continuing the classic design of a single temperature zone tube furnace, taking into account both beauty and practicality.
4. High-performance configuration: The furnace tube with an outer diameter of φ 80mm and a length of 1000mm is used, and the total length of the heating area is 400mm (200mm * 2).
Principle
The tube furnace heats the furnace through the built-in heating element, and the intelligent Control system precisely adjusts the temperature of the two independent temperature zones. The user sets the target temperature, heating program and other parameters through the Touchscreen, and the system controls the Heating power output to achieve accurate temperature control of the sample or process in the furnace tube heating.
Applications
Various CVD (chemical vapor deposition (VD)) processes
Standards
The information does not mention
Steps
1. Enter the Control system interface through the device Touchscreen.
2. Set the required temperature, heating rate, holding time and other process parameters for each temperature zone on the Touchscreen.
3. If it needs to be used as an extended single temperature zone, set the two temperature zones to the same temperature point.
4. After confirming the parameters, start the equipment and start the heating process.
Notice
• Operating temperature is 1200 ℃, do not use over temperature.
• Power supply voltage is AC220V, please make sure the power supply matches.
• Be familiar with the use of the Touchscreen Control system before operation.
• Please pay attention to the size of the furnace tube (outer diameter φ 80mm, length 1000mm) and the length of the heating zone (200mm * 2) to ensure that the sample is placed in the right position.
• Device weight is 45kg, please pay attention to safety when moving and installing.
