Overview
The NBD NBD-WBM 1600-14IT rapid sintering box furnace is a equipment suitable for rapid calcination, roasting, sintering, synthesis, ashing, melting and heat treatment of various solid materials in air atmosphere. Operating temperature up to 1600 ° C, microwave heating technology is used to significantly improve experimental efficiency.
Features
1. Achieve ultra-fast heating, significantly shorten the holding time, and double the experimental efficiency.
2. The industrial microwave source is used to ensure the continuous and stable operation of the equipment for a long time, and the microwave output power is stepless and adjustable to achieve accurate temperature control. Linear dispersion.
3. Equipped with embedded touch screen Control system, providing manual, automatic, thermostatic three operation modes and can be freely switched.
4. It can process various materials with different microwave characteristics, and set up corrosion-resistant exhaust channels, which can quickly discharge the gas generated during the heating process.
5. Safe and reliable microwave Shielding design, with multiple anti-leakage protection.
Principle
The equipment works based on the principle of microwave heating, and generates microwave with a Frequency of 2.45GHz through the magnetron, which directly acts on the material in the furnace, so that the material molecules produce high-frequency oscillation friction to generate heat quickly, and realize the rapid heating and sintering of the material.
Applications
Rapid calcination, roasting, sintering, synthesis, ashing, melting and heat treatment of solid materials
Standards
Microwave leakage intensity < 2mW/cm ²
Steps
1. Select manual, automatic or thermostatic operation mode through the embedded touch screen Control system.
2. Set the microwave output power (0.2 to 1.4 kW continuously adjustable) and the corresponding temperature program according to the material characteristics.
3. Start the equipment, the microwave source starts to work, and the material is heated.
4. During the heating process, the gas generated can be quickly discharged through the corrosion-resistant exhaust channel.
5. After the processing is completed, the equipment is chilled down according to the program or shut down by the operator.
Notice
• The device needs to be connected to AC220V 50Hz power supply, and the input Power is less than 3kW.
• Ensure chilled down water supply meets requirements (Flow rate ≥ 0.6m ³/h, pressure 0.06~ 0.12 Mpa).
• During operation, please pay attention to whether the multiple microwave anti-leakage protection functions of the equipment are normal to ensure safety.
When processing materials with different microwave characteristics, the process parameters need to be adjusted accordingly.
• Device weight is 150kg, pay attention to safety when installing and moving.
