Overview
The NBD NBD-B1500-12IT high temperature sintering furnace is a compact, safe and intelligent device. It uses an electric labjack to simplify charging, surrounded by heating elements to ensure uniform insulation field, three layers of crucible can be placed in the furnace cavity, and it is equipped with a lower loading automatic lifting structure and a special rubber discharge hole to effectively treat sintering waste gas.
Features
1. Electric labjack design simplifies loading steps and enhances safety.
2. Compact, practical and beautiful structural design.
3. The heating element is distributed around, and the temperature field is more uniform.
4. Circular heating furnace cavity can place three layers of crucible.
5. Adopt a lower loading automatic lifting structure.
6. The carefully designed glue discharge hole solves the problem of waste gas generated during the sintering process of the material.
7. The independently developed Touchscreen Control system is simple, intuitive and fast to operate.
8. 15 temperature-dependent sintered Linear dispersions can be pre-stored.
9. Equipped with NBD WiFi control module, it supports remote observation and control of the working status of the device through the mobile phone, and realizes intelligent operation.
Principle
The high-temperature sintering furnace heats the furnace cavity through heating elements distributed around the furnace, up to a maximum temperature of 1500 ° C. The material is placed in the furnace cavity and the sintering process is carried out through a preset temperature Linear dispersion. The generated exhaust gas is discharged through a specially designed glue drain hole. The operation of the equipment can be monitored and operated locally through Touchscreen or remotely through WiFi module.
Applications
Material sintering, high temperature treatment
Standards
The information does not mention
Steps
1. Charging by electric labjack.
2. Select or set the sintering temperature on the Touchscreen Control system Linear dispersion.
3. Start the equipment and start the sintering process.
4. The sintering process can be observed and controlled remotely through the mobile app (such as equipped with WiFi module).
5. After the sintering is completed, wait for the equipment to chill down and unload through the labjack.
Notice
• Please pay attention to the safety of labjack operation when loading and unloading.
• Exhaust gas will be generated during the sintering process, please ensure that the glue discharge hole is unobstructed and in a good ventilated environment.
• Operating temperature is 1500 ℃, high temperature protection should be paid attention to during operation.
• The remote monitoring function needs to be used with the NBD WiFi control module.
