Overview
FA1004C Multifunctional Electronic Balance is a new generation product of Tianma brand FA-C Touchscreen series. It adopts High Accuracy Electromagnetic Force equilibrating Sensor, which has higher accuracy of measurement results, faster Response speed and fewer failures.
Features
1. The weighing speed is fast, several times faster than the general mechanical Balance, and the speed can be adjusted.
2. The operation is simple and easy to learn, and the software system provides a variety of internationally used mass units for users to choose and convert at will.
3. Highly intelligent, with full-scale peeling, clearing, over-load display and fault alarm functions.
4. Available with a variety of functions such as counting.
5. Built-in RS-232 interface, which can be connected to external devices such as printers and computers.
6. Product standard test weight.
Principle
High Accuracy Electromagnetic Force equilibrating Sensor for measurement.
Applications
Laboratory, industry, education, scientific research
Standards
Accuracy class: Class I
Steps
Connect the Power Adapter to a 220V 50Hz power supply.
2. Boot warm up until Balance is stable.
3. Carry out unit conversion, peeling, clearing and other operations as required.
4. Place the item to be weighed for weighing.
5. External devices can be connected through RS-232 interface for data output.
Notice
• Working Ambient Temperature should be maintained between 17.5 ° C and 22.5 ° C, and the temperature fluctuation should not exceed 1 ° C/hour.
• Environmental humidity should be kept between 50% and 75% RH.
• Please use the standard AC adapter (input 220V 50Hz, output DC9V-2.2A).
• Minimum Weight is 10mg, do not weigh items below this value.
• Capacity value is 100g, please do not overload.
• Make sure the Balance is stable before use (Stabilization time ≤ 8 seconds).
