Overview
FA1604C Multifunctional Electronic Balance is a new generation product of Tianma brand FA-C Touchscreen series. It uses High Accuracy Electromagnetic Force equilibrating Sensor to achieve higher accuracy of measurement results, faster Response speed and fewer faults.
Features
1. The weighing speed is fast, several times faster than the general mechanical Balance, and the speed can be adjusted.
2. The operation is simple and easy to learn, and the software system provides a variety of internationally used mass units for users to choose and convert at will.
3. Highly intelligent, with full-scale peeling, clearing, over-load display and fault alarm functions.
4. With a variety of optional functions such as counting.
5. Built-in RS-232 interface, which can be connected to external devices such as printers and computers.
6. Product standard test weight.
Principle
This product uses High Accuracy Electromagnetic Force equilibrating Sensor for weighing.
Applications
Laboratory weighing, industrial weighing, mass testing, counting applications
Standards
Class I accuracy class
Steps
Connect the Power Adapter (220V 50Hz).
2. Boot preheating to ensure that the Working Ambient Temperature (17.5 ℃~ 22.5 ℃) and Humidity (50~ 75% RH) meet the requirements.
3. Use standard weight to calibrate.
4. Place the item to be weighed on the pan (80 mm).
5. Perform weighing, unit conversion, peeling, clearing and other operations through a 5-inch color Touchscreen.
6. Output data can be connected to external devices through the RS-232 interface.
Notice
• Please ensure that the Working Ambient Temperature is between 17.5 ° C and 22.5 ° C, and the temperature fluctuation is not more than 1 ° C per hour.
• Environmental humidity between 50% and 75% RH.
• Please use the specified AC adapter (input 220V 50Hz, output DC9V-2.2A) for power supply.
• Capacity value is 160g, please do not overload.
• Minimum Weight is 10mg, below which may affect weighing accuracy.
• Note that the repeatability error is +/- 0.0003g.
• Please note the MPE according to the load range (expressed in the verification scale interval e): +/- 0.5e for 0 ≤ m ≤ 50000; +/- 1.0e for 50000 < m ≤ 200000; +/- 1.5e for 200000 < m.
• Stabilization time may be ≤ 8 seconds, please wait for the reading to stabilize.
• Product gross weight 9kg, please pay attention when handling.
• Do not use in environments that do not meet the requirements, so as not to affect the Measurement accuracy or damage the equipment.
