Overview
FA3004C Multifunctional Electronic Balance is a new generation product of Tianma brand FA-C Touchscreen series. It adopts High Accuracy Electromagnetic Force equilibrating Sensor, which has the characteristics of high measurement accuracy, fast Response speed and low failure rate.
Features
1. Weighing speed is fast, adjustable speed, several times faster than general mechanical Balance.
2. Simple to operate, the software system supports a variety of internationally used mass unit conversions.
3. Highly intelligent, with full-scale peeling, clearing, over-load display and fault alarm functions.
4. With a variety of optional functions such as counting.
5. Built-in RS-232 interface, which can be connected to external devices such as printers and computers.
6. Product standard test weight.
Principle
The Balance uses High Accuracy Electromagnetic Force equilibrating Sensor for measurement. The mass is accurately measured by equilibrating the electromagnetic force and the weight force of the object, and the data is processed by the software system to achieve fast and accurate weighing results.
Applications
Laboratory, industrial weighing, quality control, teaching and research, medicine, food, chemical industry, jewelry weighing
Standards
Accuracy class: Class I
Steps
1. Place the Balance on a stable, level workbench.
Connect the AC adapter (220V 50Hz) to the power supply to power the Balance.
3. Boot warm up until Balance is stable.
4. Calibrate as needed (using standard test weights).
5. Weighing operation through 5-inch color Touchscreen, unit, peeling, clearing and other functions can be selected.
6. After weighing is completed, external devices can be connected to output data through the RS-232 interface.
Notice
* Please ensure that the Working Ambient Temperature is between 17.5 ° C and 22.5 ° C, and the temperature fluctuation is not greater than 1 ° C/h.
* Environmental humidity is between 50% and 75% RH.
* Warm up before weighing and ensure Balance is stable.
* Do not exceed the Capacity value of 300g.
* Minimum Weight is 10mg, below this value may affect accuracy.
* Periodically calibrated using standard test weights for accuracy.
* Please use the original AC adapter (output DC9V-2.2A) for power supply.
* Attention to windproof, precision weighing is recommended in standard Draft Shield.
