Overview
JA4003C Multifunctional Electronic Balance is a new generation product of Tianma brand JA-C Touchscreen series. It adopts High Accuracy Electromagnetic Force equilibrating Sensor, which has higher accuracy of measurement results, faster Response speed and fewer failures.
Features
1. The weighing speed is fast, several times faster than the general mechanical Balance, and the speed can be adjusted.
2. The operation is simple and easy to learn, and the software system provides a variety of internationally used mass unit conversion functions.
3. Highly intelligent, supports full-scale peeling and clearing, with overload, underload display and fault alarm functions.
4. Available with a variety of functions such as counting.
5. Built-in RS-232 interface, which can be connected to external devices such as printers and computers.
6. Product standard test weight.
Principle
High Accuracy Electromagnetic Force equilibrating Sensor for measurement.
Applications
Laboratory, industrial weighing, mass testing, counting applications
Standards
Accuracy class: II
Steps
1. Connect the AC adapter power supply (220V 50Hz).
2. Turn it on and warm up.
3. Use the standard test weight to calibrate.
4. Place the item to be weighed on the pan (90 mm).
5. Perform weighing, unit conversion, peeling, clearing and other operations through a 5-inch color Touchscreen.
6. Output data can be connected to external devices through the RS-232 interface.
Notice
* Ambient Temperature should be kept at 15 ℃~ 30 ℃, and the temperature fluctuation should not exceed 5 ℃/h.
* Environmental humidity should be kept at 40~ 75% RH.
Make sure the power supply is AC adapter 220V 50Hz, output DC9V-2.2A.
* Minimum Weight is 20mg, below this value may affect accuracy.
* Note that the Capacity value is 400g to avoid overloading.
When weighing, please use the standard Draft Shield (size 220 * 200 * 250mm) to ensure stability.
* Stabilization time is usually ≤ 5 seconds, please read after the value is stable.
