Overview
JA5003C Multifunctional Electronic Balance is a new generation product of Tianma brand JA-C Touchscreen series. It adopts High Accuracy Electromagnetic Force equilibrating Sensor, which has higher accuracy of measurement results, faster Response speed and fewer failures.
Features
1. The weighing speed is fast, several times faster than the general mechanical Balance, and the speed can be adjusted.
2. The operation is simple and easy to learn, and the software system provides a variety of internationally used mass units for users to choose and convert at will.
3. Highly intelligent, with full-scale peeling, clearing, overload/underload display and fault alarm functions.
4. Available with a variety of functions such as counting.
5. Built-in RS-232 interface, which can be connected to external devices such as printers and computers.
6. Product standard test weight.
Principle
High Accuracy Electromagnetic Force equilibrating Sensor for measurement.
Applications
Laboratory, Industry, Education, Quality control
Standards
Accuracy class: II
Steps
1. Connect the AC adapter power supply (220V, 50Hz).
2. Boot preheating, ensure that the working Ambient Temperature is 15 ℃~ 30 ℃ and the fluctuation is not more than 5 ℃/h, Humidity is 40~ 75% RH.
3. Use the standard 200g test weight to calibrate.
4. Perform human-machine interaction operation through 5-inch color Touchscreen, and can perform function settings such as unit conversion, peeling, clearing, and counting.
5. Place the item to be weighed on a 90mm pan for weighing, Stabilization time ≤ 5 seconds.
6. If you need data output, you can connect the printer or computer through the built-in RS-232 interface.
Notice
* Please ensure that the Working Ambient Temperature is within the range of 15 ° C to 30 ° C, and the temperature fluctuation per hour is not more than 5 ° C.
* Environmental humidity between 40% and 75% RH.
* Please calibrate with standard test weight before use to ensure measurement accuracy.
* Capacity value is 500g, please do not overload.
* Minimum Weight is 20mg, below this value may affect Measurement accuracy.
* Note that the power requirements are AC adapter input 220V, 50Hz, output DC9V-2.2A.
It is recommended to use the standard Draft Shield (size 220 * 200 * 250mm) when weighing to reduce airflow interference.
* Product gross weight 9kg, please pay attention to safety when moving and placing.
