Overview
FA1604BC Multifunctional Electronic Balance is a new generation product newly developed by Tianma brand. It adopts High Accuracy Electromagnetic Force equilibrating Sensor, which has higher accuracy of measurement results, faster Response speed and fewer faults.
Features
1. The weighing speed is fast, several times faster than the general mechanical Balance, and the speed can be adjusted.
2. The operation is simple and easy to learn, and the software system provides a variety of internationally used mass units for arbitrary conversion.
3. Highly intelligent, with full-scale peeling, clearing, over-load display and fault alarm functions.
4. With a variety of optional functions such as counting.
5. Built-in RS-232 interface, which can be connected to external devices such as printers and computers.
6. Adopt automatic built-in weight calibrating, easy to use, simple operation, and all functions of FA series Electronic Balance.
Principle
This product uses High Accuracy Electromagnetic Force equilibrating Sensor for weighing.
Applications
Laboratory, industry, education, scientific research
Standards
Accuracy class: Class I
Steps
Connect the Power Adapter (220V 50Hz).
2. Boot preheating to ensure that the Working Ambient Temperature is between 17.5 ° C and 22.5 ° C, Humidity is between 50 and 75% RH.
3. Use Touchscreen for fully automatic built-in weight calibrating.
4. Place the item to be weighed on the pan (80 mm).
5. Perform weighing, unit conversion, peeling, clearing and other operations through a 5-inch color Touchscreen.
6. Output data can be connected to external devices through the RS-232 interface.
Notice
* Working Ambient Temperature should be maintained at 17.5 ℃~ 22.5 ℃, and the temperature fluctuation should not exceed 1 ℃/hour.
* Environmental humidity should be kept at 50~ 75% RH.
Please use the specified AC adapter (input 220V 50Hz, output DC9V-2.2A).
* Minimum Weight is 10mg, do not weigh items below this value.
* Capacity value is 160g, please do not overload.
* Note the use of Draft Shield (size 220 * 200 * 250mm) to reduce the impact of airflow symmetry.
* Stabilization time may be up to 8 seconds, please wait for the display to be stable before reading the data.
