Overview
FA2204BC Multifunctional Electronic Balance is a new generation product newly developed by Tianma brand, which belongs to the FA-BC internal calibration Touchscreen series. The product adopts High Accuracy Electromagnetic Force equilibrating Sensor, which has higher accuracy of measurement results, faster Response speed and fewer failures.
Features
1. The weighing speed is fast, several times faster than the general mechanical Balance, and the speed can be adjusted.
2. The operation is simple and easy to learn, and the software system provides a variety of internationally used mass units for users to choose and convert at will.
3. Highly intelligent, with full range of peeling, clearing, over and under load display and fault alarm functions.
4. Available with a variety of functions such as counting.
5. Built-in RS-232 interface, can be connected to external devices such as printers and computers.
6. Adopt automatic built-in weight calibrating, easy to use, simple operation, and all the functions of FA series Electronic Balance.
Principle
The product uses a High Accuracy Electromagnetic Force equilibrating Sensor to accurately measure mass by equilibrating the electromagnetic force with the weight of the object.
Applications
Laboratory weighing, industrial testing, quality control, teaching and research, pharmaceutical and chemical industry, food analysis, jewelry weighing
Standards
Accuracy class: Class I
Steps
1. Place the Balance on a stable, horizontal table and connect it to the AC adapter power supply.
2. Turn on the power switch and wait for the system start-up and self-test to complete.
3. Perform unit selection, mode settings (such as counting mode) through Touchscreen as required.
4. Fully automatic built-in weight calibrating (please refer to the product manual for specific operation).
5. Place the item to be weighed gently in the center of the pan and record the result after the reading is stable.
6. When using the peeling function, place the container first, press the "peeling" button to clear, and then add the item for weighing.
7. After use, turn off the power and clean the pan and Draft Shield.
Notice
* Please ensure that Balance is placed in a stable, vibration-free, horizontal working environment.
* Working Ambient Temperature should be maintained between 17.5 ° C and 22.5 ° C, and temperature fluctuations should not exceed 1 ° C/hour.
* Environmental humidity should be maintained between 50% and 75% RH.
* Please use the AC adapter specified by the product (input: 220V 50Hz; output: DC9V-2.2A) for power supply.
* Do not exceed the Capacity value 220g when weighing, and ensure that the weight of the item is not less than the Minimum Weight 10mg.
* Do not perform precision weighing in an environment where the Draft Shield is not closed or there is strong airflow.
* Keep the pan clean and avoid direct contact with corrosive substances.
* Please handle the Balance with care to avoid violent vibration or impact.
* If not in use for a long time, please disconnect the power supply.
