Overview
FA3004BC Multifunctional Electronic Balance is a new generation of the Tianma brand FA-BC internal calibration Touchscreen series. It uses High Accuracy Electromagnetic Force equilibrating Sensor to ensure high accuracy, fast Response and low failure rate of measurement results.
Features
1. Weighing speed is fast, adjustable speed, several times faster than general mechanical Balance.
2. The operation is simple and easy to learn, and supports a variety of internationally used mass unit conversions.
3. Highly intelligent, with full-scale peeling, clearing, over-load display and fault alarm functions.
4. With a variety of optional functions such as counting.
5. Built-in RS-232 interface, which can be connected to external devices such as printers and computers.
6. Adopt automatic built-in weight calibrating, easy to use and easy to operate.
Principle
The Electronic Balance uses a High Accuracy Electromagnetic Force equilibrating Sensor for measurement. When an item is placed on a pan, the Sensor generates electromagnetic force to equilibrate the gravity of the item, and processes the electromagnetic force signal to accurately calculate and display the mass of the item.
Applications
Laboratory, industrial weighing, mass testing, education and research, pharmaceutical, food, chemical industry
Standards
Accuracy class: Class I
Steps
1. Place the Balance on a stable, level workbench.
Connect the AC adapter (220V 50Hz) to the power supply.
3. Turn it on and warm up and wait for the system to stabilize.
4. Fully automatic built-in weight calibrating as required.
5. Place the item to be weighed gently in the center of the pan (80 mm).
6. Perform reading, unit conversion, peeling, counting and other operations through a 5-inch color Touchscreen.
7. After use, turn off the power and clean the pan.
Notice
* Please ensure that the Working Ambient Temperature is between 17.5 ° C and 22.5 ° C, and the temperature fluctuation is not greater than 1 ° C/h.
* Please ensure that the working Environmental humidity is within the range of 50~ 75% RH.
* Please use the specified AC adapter (output DC9V-2.2A) for power supply.
* Please use Draft Shield (size 220 * 200 * 250mm) when weighing, and avoid airflow and vibration interference.
* Do not exceed the Capacity value of 300g, Minimum Weight is 10mg.
* Do not use in humid, dusty or corrosive gas environments.
Please use a soft cloth when cleaning to prevent liquids from entering the body.
