Overview
Tianma TD30002 Electronic Balance is a High Accuracy weighing device with a Capacity range of 3000g and a minimum weighing value of 0.01g. It adopts strain gauge Sensor technology and has a fast stabilization time (≤ 5 seconds) and an accuracy class III. Suitable for laboratory, industrial and other environments, Operating Conditions are 5~ 40 ℃ and 50%~ 60% RH.
Features
1. With peeling, weighing auto calibration, automatic clearing, zero automatic tracking and fault display and other functions
2. Counting function (point function), which can be easily used for counting Balance
3. International unit conversion function
4. Large LCD screen display
5. Equipped with RS232 serial port
6. Equipped with a calibrated weight
7. Strain Gauge Sensor
8. Standard calibrated weight
Principle
Tianma TD30002 Electronic Balance is based on strain gauge Sensor technology, which converts the weight into an electrical signal through the Sensor and displays it on the LCD screen after internal processing. It supports auto calibration and zero tracking to ensure weighing accuracy.
Applications
Laboratory, industry
Standards
Accuracy class: III
Steps
1. Place the Balance on a stable plane and connect the power supply
2. Wait for stabilization after booting, perform auto calibration or use external calibrated weight calibrated
3. Place the item for weighing, and the peeling function can be used.
4. Connect external devices to transmit data through the RS232 interface
5. When using the counting function, follow the instructions
Notice
• Ensure that the working Ambient Temperature is within the range of 5~ 40 ℃ and humidity 50%~ 60% RH
• calibrate before use to ensure accuracy
• Avoid overloading, Capacity does not exceed 3000g
• Keep the pan clean to prevent affecting the weighing results
• Power frequency must meet~ 220V +/- 10% 50/60Hz requirements
