Overview
The HBO SF-S Moisture Meter is a Portable moisture measurement device using inductive non-destructive detection method. Equipped with LCD digital display and LED status indicator, the instrument supports USB, RS-232 and Bluetooth data output methods, and is suitable for moisture content determination of various nonconductive substances.
Features
1. Adopt inductive non-destructive detection method
2. With LCD digital display and LED status indication two display methods
3. Support USB data cable output and RS-232 data cable output to communicate with PC
4. Provide Bluetooth data output selection
5. Equipped with color-coded LEDs to indicate moisture status (green light safe, yellow light critical, red light humid)
6. With boot auto calibration function
7. Built-in low voltage prompt function
8. Portable design, weight only 119g (without battery)
Principle
Inductive measurement method is used to measure the moisture content of the tested substance through non-damage detection technology. The instrument senses the moisture content of the substance through Sensor, and presents the measurement results in dual ways through LCD digital display and LED status indicator.
Applications
Determination of moisture content of nonconductive substances such as wood, bamboo products, wood, cotton, paper, chemical raw materials, building materials, oil products, etc
Steps
1. Load 4 AA batteries
2. Boot auto calibration
3. Contact the instrument with the measured substance for measurement
4. Read LCD display values and LED status indicators
5. Data can be output via USB, RS-232 or Bluetooth interface
Notice
• Only suitable for moisture content determination of nonconductive substances
• Working ambient temperature range is 0~ 50 ℃
The working environment humidity should be less than 90% RH
• Pay attention to the low voltage prompt of the battery and replace the battery in time
• Accuracy of measurement range 0~ 70% +/- (0.5% n + 0.5)
• 0.1% resolution
• instrument weight 119g (without battery)
