Overview
AMITTARI FG-104-5K Digital Display Force Gauge is a small, simple and multi-functional High Accuracy thrust and tension testing instrument, which is widely used in Electronics, Construction Hardware, Light Industry Spinning & Weaving, Auto Parts, Lighters and other ignition devices, fire fighting equipment, pen making, lock making, fishing gear, chemical industry, power machinery, scientific research institutions and other industries. Push-pull load, insertion force test, Destructiveness test, etc.
Features
1. High Accuracy and high resolution, digital display ignores poor.
2. N (newton), kg (kilogram), lb (pound), g (gram) four measurement units are available and converted to each other.
3. Peak hold function, keep peak display until manually cleared.
4. Green and environmentally friendly, it can be set to shut down automatically or manually for 10 minutes without operation.
5. Can be powered by alkaline battery or 6V DC power supply.
Principle
Digital Force Gauge converts physical quantities into electrical signals through Sensor measurement of thrust or pull, and displays measurement values on a four-digit large LCD screen after processing. It has a peak hold function, locks the maximum measurement value, supports multiple unit conversions, and has an overload alarm mechanism.
Applications
Electronics, Construction Hardware, Light Industry Spinning & weaving, Auto Parts, Lighters and other ignition devices, Fire Equipment, Pen Making, Lock Making, Fishing Tackle, Chemical Industry, Power Machinery, Scientific Research Institutions
Steps
1. Install the battery or connect the 6V DC power supply.
2. Select the desired measurement unit (N, kg, lb, g).
3. Perform a thrust or tension test, and the instrument automatically displays the instantaneous value and peak value.
4. Use the peak hold function to lock the MAX Maximum, and manually clear it.
5. After the test is completed, you can shut down manually or wait for 10 minutes to shut down automatically.
Notice
- Allowable load does not exceed 150% F.s. There is a beep alarm when it exceeds 110% F.s.
- The operation temperature range is 0~ 40 ° C.
- The relative humidity should be less than 80%.
- The working environment needs to be free of seismic sources and corrosive media.
Avoid overloading to prevent damage to the instrument.
