Please contact customer service
Maximum test force 5KN, accuracy of +/- 0.5%. With automatic shift, a variety of Linear dispersion display and analysis, automatic sample break stop, overload automatic protection and data automatic storage functions, easy to operate, accurate and reliable testing.
Category : Tensile Testing Machine
Brand : RongJiDa
SKU : NB028139
Service :The delivery and service By NBCLab.Com
RONGJIDA WDW-5KN electronic universal testing machine is a mechanical analysis and testing equipment widely used in polymer materials, waterproof membranes, mortar building materials, Rubber & plastics, Wire and cable, Spinning & weaving, engineering plastics, Pottery and porcelain, metal materials, food Encasement and other industries. The testing machine is equipped with a special fixture, which can be used for dry powder mortar, thermal insulation mortar, waterproof membrane, plaster, paints Coating, artificial plates, electronic components, paper cloth and other materials. Tensile, compression, bending, shearing, disbonding, tearing and other physical mechanical properties tests.
1. Configure the brand computer, using the Chinese WINDOWS XP user interface, menu prompts, mouse selection operation, simple and convenient. 2. Linear dispersion and data are displayed dynamically over the course of the test. 3. Automatically switch to the appropriate range according to the load size to ensure Measurement accuracy. 4. The test process and the measurement, display, analysis, printing and other functions are completed by the microcomputer. 5. Support a variety of Linear dispersion display methods, such as force-elongation, stress-strain, strength-time, etc. 6. Linear dispersion of the same group of experiments can be superimposed and compared with various Colors. 7. Linear dispersion on any segment can be regional magnification analysis. 8. The experimental data on the Linear dispersion chart can be selected and analyzed at will. 9. Different report formats (such as EXCEL or Word) can be selected by user request and can be viewed or partially printed. 10. A set of sample results can be selected for effective testing and can be continuously tested. 11. Test conditions, test results, test Linear dispersion and data can be automatically stored and called at any time. 12. The specimen can stop or return to the initial position when it is broken. 13. With automatic overload, overcurrent, overvoltage, undervoltage, upper and lower limit protection functions. 14. The moving beam can be set at different speeds, allowing it to accurately and automatically return to the initial test position. 15. Control mode with constant speed. 16. Different force units (N, kgf, gf) can be selected. 17. Can test data processing, storage, printing, drawing Linear dispersion, and print reports. 18. Automatic calibration of electrical calibration values for load and elongation. 19. Load, deformation, displacement measurement can be manually or automatically cleared at any time.
This machine is mainly composed of two parts: machinery and electrical appliances. The mechanical part adopts mechanical loading, and the motor drives the gear reducer. The power transmission lead screw drives the middle beam to move up and down to realize the tensile and compression tests of the specimen. The measurement part adopts computer control, High Accuracy load element, High Accuracy AD conversion and imported photoelectric encoder. Its working principle is: the testing machine is loaded to generate an electrical signal from the Sensor under force and send it to the AD converter. At the same time, the lead screw rotates to drive the encoder to generate a pulse signal and input it into the microcomputer. After control and adjustment, the test results are displayed on the microcomputer screen.
Polymer Materials, Waterproofing Membrane, Mortar Building Materials, Rubber & plastics, Wire and cable, Spinning & weaving, Engineering Plastics, Pottery and porcelain, Metal Materials, Food Encasement, Dry Mortar, Insulation Mortar, Plaster, paints Coatings, Artificial Sheets, Electronic Components, Paper Fabrics
The environment temperature should be between 10 and 30 degrees Celsius. 2. The relative humidity should be ≤ 80%. 3. It should be installed correctly on a solid foundation or workbench. 4. There should be no sources of vibration or corrosive substances around. 5. Power supply voltage fluctuation range should not exceed +/- 5% of rated voltage.
[A] No, it isn't. This is the ex-factory price of the product in the Chinese Mainland. In addition to this price, buyers from different countries need to account for additional costs such as shipping fees, tariffs, and others. For specific regional quotes, please consult our customer service or fill out a quotation form.
[A] First, please click on the quotation form on the website and fill in detailed information. Our customer service personnel will then send you a quotation based on your specific country and region, confirming payment and delivery methods. Following this, we proceed with contract signing, payment, and shipment. You can then await delivery.
[A] After-sales repair for overseas instruments is an unavoidable issue. Our repair terms stipulate that the sender is responsible for the shipping and insurance costs incurred for the repair. Repairs within the warranty period are free, while repair costs beyond the warranty period are determined based on the actual situation.
