Please contact customer service
Measurement range 1-190mm, can measure steel bars with diaMeter φ 6-φ 50mm. With waveform, section and other scanning modes, dense steel bars are clearly identified, and multiple positioning prompts such as laser and sound are supported.
Category : Other Adhesion Testers
Brand : KOSON
SKU : NB028210
Service :The delivery and service By NBCLab.Com
KOSON KS-72 Reinforcement Position Tester is a precision instrument used to detect the construction mass of reinforced concrete. It is mainly used to detect the position, thickness of protective layer, distribution direction and diameter of steel bars in concrete structures. It is suitable for housing projects, bridges, tunnels, dams, pavements and other scenarios. It can also be used to detect the distribution of magnetic materials in non-magnetic materials. The instrument provides professional testing means for construction quality control, engineering acceptance, safety appraisal and maintenance and reinforcement.
1. Specially set JGJ Measurement mode, which can detect multiple points for each steel bar and automatically calculate the average evaluation pass rate. 2. Equipped with 3.6-inch large color LCD screen, clear display, support luminance adjustment to adapt to different environments. 3. Provide five scanning modes of thickness, waveform, section, grid and standard measurement to adapt to different size components, and the results are intuitive. 4. Equipped with the waveform recognition function of dense steel bars, it can clearly judge the ultra-small spacing steel bars to ensure that the number of bars is accurately judged without leakage. 5. Use laser, sight, sound, and indicator lights to indicate the position of steel bars, the thickness of the protective layer, and the central axis of adjacent steel bars. 6. Humanized handle grip design, comfortable glue. 7. Measurement mode of multi-coil combination, accurate positioning calculation, high accuracy. 8. Support the function of manual correction of steel bars, which can correct the leakage of ribs or multiple judgments, and automatically calculate the spacing and thickness of the protective layer. 9. Automatic shutdown time can be set, with one-click clearing function, convenient calibration. 10. Support data wired (USB) and wireless transmission methods, with built-in large storage space, which can store data, pictures, etc. 11. Built-in high-capacity safety lithium battery, low-power design, strong battery life, can be used continuously for more than 30 hours. 12. Equipped with professional Data analysis software, closely linked to national standards, providing seven report formats and automatically generating and printing test reports.
The KOSON KS-72 steel bar position measuring instrument works based on the principle of electromagnetic induction. The transmitting coil inside the instrument generates an alternating electromagnetic field. When it is close to the steel bar (magnetic material) in the concrete, it will induce an eddy current in the steel bar, which will change the electromagnetic field signal of the receiving coil of the instrument. By analyzing the changes in these signals, the instrument can accurately calculate the position of the steel bar, the thickness of the protective layer, the diameter and the distribution direction of the distribution.
Housing engineering, bridges, tunnels, dams, pavements and other concrete structure construction mass inspection, reinforced concrete engineering mass acceptance, housing safety appraisal, highway maintenance, reinforcement, water conservancy and civil air defense engineering reinforcement inspection, magnetic materials in various non-magnetic materials (such as Wire and cable, magnetic pipeline) detection and positioning
GB 50204-2015 "concrete structure engineering construction mass acceptance code", GB 50010-2010 "concrete structure design code", GB/T50344-2004 "building structure detection technology standard", JGJ/T152-2008 "concrete reinforcement detection technology regulations", DB11/T365-2006 "electromagnetic induction method to detect the thickness and diameter of steel reinforcement
1. Turn on and adjust the LCD luminance according to the detection environment. 2. Select the appropriate scanning mode (thickness, waveform, section, grid or specification measurement) according to the detection requirements. 3. Probe the instrument close to the concrete surface and move slowly. 4. Observe the screen waveform or prompt (laser, sound, indicator light, etc.) to locate the position of the steel bar. 5. Measurement mode, the measurement of the specified part of each bar, the instrument will automatically record and calculate the average value. 6. In case of leakage or multiple judgments, the manual correction function can be used to adjust. 7. The measurement data is automatically stored and can be transferred to the computer via USB or wired/wireless. 8. Use professional software to analyze data, choose a report format, and generate a test report. 9. After use, you can set automatic shutdown or manual shutdown.
• Please ensure that the instrument is fully charged before use. • Ambient Temperature should be between -20 ° C and 60 ° C, and relative humidity should be less than 90% RH. • In areas with dense steel bars, the waveform should be carefully identified to avoid misjudgment or omission. • When performing calibration or clearing operations, it needs to be carried out in a concrete area without reinforcement interference. • Avoid strong impacts or prolonged exposure to extreme environments. When transferring data, ensure that the connection is stable. • Please use the original charging equipment to charge the battery. • Regularly backup stored data through professional software.
[A] No, it isn't. This is the ex-factory price of the product in the Chinese Mainland. In addition to this price, buyers from different countries need to account for additional costs such as shipping fees, tariffs, and others. For specific regional quotes, please consult our customer service or fill out a quotation form.
[A] First, please click on the quotation form on the website and fill in detailed information. Our customer service personnel will then send you a quotation based on your specific country and region, confirming payment and delivery methods. Following this, we proceed with contract signing, payment, and shipment. You can then await delivery.
[A] After-sales repair for overseas instruments is an unavoidable issue. Our repair terms stipulate that the sender is responsible for the shipping and insurance costs incurred for the repair. Repairs within the warranty period are free, while repair costs beyond the warranty period are determined based on the actual situation.
