Overview
The PN-PC15 standard Paper cutter is a special sampling device for paper and Cardboard physical performance testing. It can be used to cut standard size samples with a width of 15mm. It is a standard Paper cutter commonly used in China. The Paper cutter can be widely used in paper and Cardboard tensile test, folding test, short-distance compression test and other items. It is a satisfactory auxiliary test equipment for industries and departments such as papermaking, Encasement, scientific research and Quality control.
Features
1. Specialized preparation for physical performance testing of paper and Cardboard.
2. Standard size samples with a width of 15mm can be cut.
3. The parallelism of both sides of the sampling is less than or equal to 0.1mm, with high accuracy.
4. The sampling width error is +/- 0.1mm, and the size is accurate.
5. The sampling length can reach ≤ 300mm, with a wide range of applications.
Principle
The device is a mechanical cutting tool that cuts straight through a sharp blade under a specific guide to ensure that standard specimens with accurate width and high edge parallelism can be cut from paper or Cardboard to meet the strict requirements of subsequent physical performance tests on specimen size.
Applications
Papermaking, Encasement, Research, Quality control
Steps
1. Place the equipment on a bench that meets environmental conditions (indoor temperature (20 +/- 10) ° C; relative humidity < 85%).
2. Place the paper or Cardboard to be sampled in the working area of the Paper cutter.
3. Adjust the position of the pattern to ensure that the part to be cut is aligned with the knife edge and guide.
4. Operate the cutting mechanism to apply pressure smoothly and evenly to complete the sample cutting.
5. Take out the cut standard sample (size 300 * 15mm) and check whether the edge parallelism and width meet the requirements.
Notice
• Please confirm that the equipment blade is sharp and firmly installed before use.
• Smooth force should be applied during operation to avoid tearing of the sample or damage to the equipment due to excessive force.
• Please use under specified environmental conditions (Temperature 20 +/- 10 ° C, Humidity < 85%) to ensure sampling accuracy.
• Clean the equipment in time after use, keep the knife edge clean, and store it properly.
• Non-professionals should not disassemble or adjust the core components of the equipment, so as not to affect the accuracy.
• Pay attention to operation safety to avoid knife injuries.
